The iDR-In audio expander provides an additional 8 mic/line inputs on XLR when connected to an iDR-4 or iDR-8.
iDR-In converts the analogue audio to an 8 channel wide digital bus which feeds the main iDR unit, which can be up to 250 metres away, via CAT5 STP cable. iDR-In features high grade mic/line preamps with PC configured gain, pad and phantom power switching via DR-Link, and a built-in soft clip. The expander has 8 front panel LEDs in addition to the 3 status indicators - these are 3-colour soft LEDs which can be assigned as audio meters, mute indicators or presets related indicators and are programmed in the usual way using the iDR System Manager software.
- RJ45 connector
- Proprietary 8 channel digital audio
- Connects to iDR-4 or iDR-8 main unit
- CAT5 STP cable up to 250 metres (825 feet)
- 24bit resolution
- Serial control of iDR expander units
- Proprietary Allen & Heath control protocol
- IN and OUT ports provided to allow daisy chaining through multiple units
- CAT5 STP cable up to 300 metres (1000 feet)
- Universal mains input switched mode design
- IEC 3pin
- Country dependent mains lead supplied
- Rear panel power on/off switch
- Power –mains power on
- Link – iDR-Link control communicating
- Lock –audio communicating
