The UV1-SL converts a VGA signal into a Cat5 and sends this Cat5 signal to one of the following devices: (UV1-R and UV1-R-WP). The UV1-SL also has a loop-thru VGA port for a local monitor. The UV1-SL is supplied phantom power via the Cat5 from the sending unit or from a local power supply. The UV1-SL can be located up to 500 feet (150 meters) from the sending unit with little to no degradation of video quality.
Loop-thru VGA port for local monitor
Eliminates the need for bulky, expensive and hard to build multi-coaxial cables for high-resolution A/V extension
Amplifies the signal for clean and crisp transmission
Differential signaling eliminates ground loops and noise
Handles resolutions up to 1600x1200 at any refresh rate
Rugged, reliable, compact size
Only one end requires power in most applications
Power supply can be connected at the sending or the receiving end, whichever convenient
Drive standard CAT5 cables to 500 feet for (VGA and Component video versions) or to 1200 feet for (Composite Video and Stereo Audio version)
Receiver/Transmitter Cable Type - Other
Receiver/Transmitter Format Type - Component Video
Receiver/Transmitter Format Type - Composite Video
Receiver/Transmitter Format Type - VGA
Supported Resolution - Other
Spec Sheet available - Yes
Transmission Range:
500 ft
Current Draw:
0.50 Amps
DC Voltage:
9 Volts
Depth:
4.80 in
Height:
0.80 in
Width:
1.70 in
Shipping Weight:
2 lbs
Resolutions:
Up to 1920 x 1440 non-interlaced at 60Hz
Standards:
VGA, SVGA, XGA, or UXGA video
Video Types:
VGA through UXGA, RGBS, RGsB (sync on green), or YpbPr