1U, 4-Channel Line Output Dante Converter with Built-in DSP Mixer

Model: ML-4D/OUT-X

4 line output
4 Dante input/output
Supports PoE (Power over Ethernet)
Up to 24bit/96kHz
Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 4 in/4 out matrix mixer)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The ML-4D/OUT-X is a compact converter that converts Dante input signals into 4-channel line output signals. With half the size of a standard 1U rack, the ML-4D/OUT-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. ML-4D/OUT-X supports up to 96kHz/24bit and uses XLR connectors for analog line output.

4 line output
4 Dante input/output
Supports PoE (Power over Ethernet)
Up to 24bit/96kHz
Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 4 in/4 out matrix mixer)
Supports Dante daisy chain; this allows two Dante Compact Processor models to be connected without a network switch
Compatible with Dante Domain Manager and Dante AES67 Mode
Flexible scene preset function allows to work in different area situations (Up to 50 presets)
Timer event function allows to automatically switch scenes at a specified time (planned to be compatible on a future version update)
2 types of user control software available for Windows/Mac/iOS/Android devices:
For integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.
For end-users: simple app design for only the necessary functions such as area volume settings, etc.
Remote control via Dante
Half-rack mountable size
Equipped with indicators that show LAN/Dante connection status and sample rate
Equipped with signal indicators that monitor line output signals
Configurable reference level (via remote control only)
Surface rack mountable angles for installation under desks included
Optional accessories:
AC adapter PS-P1220E for redundant power supply available
Rack-mountable shelf AK-RS1 to install and store two Dante Compact Processor models in a 19inch rack case

Dante Enabled - Yes
Rackmountable - Yes
Spec Sheet available - Yes

Depth: 5.36 in
Height: 1.75 in
Width: 8.43 in
Product Weight: 1.90 lbs
Active Power: 4 Watt
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Rack Units (Height): 1
Formats and channels: 44.1/48/88.2/96kHz,16/24-bit, 4 channels
DATA/DATA+PoE connectors:
•Connector: RJ-45
•Transmission protocol: Dante
•Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
•Cables: category 5e or faster STP cables
ANALOG OUT connectors:
•Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
•Nominal output levels: +4 dBu (when Ref. Level not -9 dBFS), +6 dBu (when Ref. Level set to -9 dBFS)
•Maximum output level (switchable): +15 dBu (Ref. Level: -9 dBFS)
•+18 dBu (Ref. Level: -14 dBFS)
•+20 dBu (Ref. Level: -16 dBFS)
•+22 dBu (Ref. Level: -18 dBFS)
•+24 dBu (Ref. Level: -20 dBFS)
Output Impedance: 200ohm or lower

MM-2D-E - 2-channel Mic/Line Input/Output Dante Converter with built-in DSP Mixer

MM-2D-X - 1U, 2-channel Mic/Line Input/Output Dante Converter with built-in DSP Mixer

MM-4D/IN-E - 4-Channel Mic/Line Input Dante Converter with built-in DSP Mixer

MM-4D/IN-X - 1U, 4-Channel Mic/Line Input Dante Converter with built-in DSP Mixer

VS-R265 - AV Over IP Encoder and Decoder Appliance for 4K Live Streaming

Converter 1015575 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

4K, compact, plug-and-play SDI to NDI converter with loop-through

by Magewell Electronics

12G-SDI to HDMI 2.0 Converters

by AJA Video

4K, compact, plug-and-play HDMI to NDI converter with loop-through

by Magewell Electronics