The C-6200 is a multi-line full-featured desktop control console designed with VoIP Technology for use with conventional radio systems. The C-6200 is a self-contained DSP-based console that does not require CEB or under-the-desk CPU equipment. The C-6200 can be easily connected to any internal Ethernet network by connecting a standard 10/100 base TX cable to the back of the unit and assigning it an address, thus allowing for an unlimited number of C-6200 consoles to have full control and functionality over the system. To program the C-6200 console, you simply connect to the Ethernet port on the back of the console and use your favorite Web browser on your computer. The C-6200 console uses a versatile modular design that accommodates up to 18 dedicated radio circuits. You may order the C-6200 with no line cards and simply use the Ethernet port. If you are utilizing dedicated leased circuits, add line cards (up to nine) as your system continues to develop. Each line card consists of two lines. The tone control line card can be configured as a dedicated two or four-wire radio circuit or local control. Any number of consoles can be put in parallel without loading the lines even if you are not able to utilize the Ethernet port. A telephone interface card is also available allowing PSTN access for the dispatcher for the purposes of telephone usage and for crosspatch. The C-6200 console can accommodate up to three concurrent crosspatch groups. Each patch can involve more than two lines, either radio or telephone. The operator can communicate with the crosspatch groups or operate on the other channels. Its four-line liquid crystal display provides channel alpha/numeric indication and features a 12/24-hour clock and audio-level display.