RDM interface has been developed by UK-based RDM technology leader JESE practical and affordable interface between Windows PC and DMX/RDM network. TRI works with any compliant RDM device, and has been extensively tested with Tempest Digital Enclosure Control DEC3.2 and up. It is the simplest way to monitor Tempest enclosure installation, or to perform DEC field firmware upgrades. TRI generates DMX Universe frames asynchronously at rates configurable between 1 to 40 fps. Options are available to update entire frame at once, single slot within the frame or to insert single frame into transmission sequence.
- RDM protocol aware
- On board discovery
- RDM idle state bias
- RDM error management
- DMX input and output
- 120 Ohms termination
- DMX socket 1kV isolated
- Configurable Parameters
- 1 to 40 frames/second
- Frame break time (BRK)
- Mark after break (MAB)
- Triple frame buffers
- TX and RX indicators
- Audio error indicator
- Two command sets
- Robust firmware upgrade
- Published interface spec