The UC IR infrared remote gives you control of various functions to a variety of ADJ fixtures with “IR” capabilities. To control the fixture you must aim the remote at the front of the fixture and be no more than 30 feet away.
STAND BY - Pressing this button will blackout the fixture. Press the button again to return to the initial state
FULL ON - Hold this button down to fully light up the unit. When you let the button go, the unit will return to its previous state
FADE/GOBO - Control fade or GOBO (depending on the fixture)
“DIMMER +” and “DIMMER -” - Use the buttons to adjust the output intensity.
STROBE - Press and hold this button for strobing
COLOR - Press this button to activate color mode. Use buttons 1-5 to select your desired color
1- 9 BUTTONS - Use buttons 1-9 to select your desired color when color mode is active or your desired show when show mode is active
SOUND ON and OFF - Use the buttons to activate and deactivate sound active mode
SHOW 0 - Press this button to select Show 0. Use buttons 1-9 to select Shows 1-9. Press the Show 0 button twice to run Show 10, and press button 1 twice to run show 11