Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707CVT15-4-A16

Quad Analog Video, 16 Analog Audio Fiber Transmitter 1550nm DFB Laser

Model: 7707CVT15-4-A16

Single card fiber optic transmitter for up to four analog video and 16 analog audio signals
Supports both NTSC and PAL video signals
Broadcast quality analog video and audio performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
Signal transport over fiber is uninterrupted by loss of input video feeds

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707CVT-4-A16 occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity.

Single card fiber optic transmitter for up to four analog video and 16 analog audio signals
Supports both NTSC and PAL video signals
Broadcast quality analog video and audio performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
Signal transport over fiber is uninterrupted by loss of input video feeds
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
Supports single-mode and multi-mode fiber optic cable
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Adjustable equalization for up to 250m of Belden 1694A coaxial cable
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

DC Voltage: 12 Volts
Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
Analog Video Input Number of Inputs: 4
Analog Video Input Connector: BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization: 12 bits
Analog Video Input System Bandwidth: 5.5 MHz
Analog Video Input Input Level: 2 V p-p (Maximum)
Analog Video Input Gain Equalization: up to 250m of Belden 1694A or equivalent (adjustable)
Analog Video Input Input impedance: 75 ohm
Analog Video Input Return Loss: > 30dB to 5.5 MHz
Analog Video Input Signal/Noise Ratio: > 70 dB
Analog Video Input Differential Gain: < 1.0 %
Analog Video Input Differential Phase: < 0.7°
Analog Video Input NTSC: < ±0.1dB to 4.1 MHz
Analog Video Input: < ±0.2dB to 5.5 MHz
Analog Video Input PAL: < ±0.1dB to 4.8 MHz
Analog Video Input Chroma/Luma Gain: 98% to 103%
Analog Video Input Line Time Distortion: 0.012
Analog Audio Inputs Number of Inputs: 16
Analog Audio Inputs Type: Balanced analog audio
Analog Audio Inputs Connector: 48-pin removable terminal block
Analog Audio Inputs Input impedance: High Impedance (> 20 kohm
Analog Audio Inputs Freq. Response: ±0.1dB, 20Hz to 20kHz
Analog Audio Inputs THD 20Hz-20kHz: < 0.005%
Analog Audio Inputs Channel Phase Diff.: ±1°
Analog Audio Inputs SNR (weighted): > 85dB
Analog Audio Inputs Max. Audio Input Level: +24dBu
Analog Audio Inputs Signal Quantization: 24 Bits
Optical Outputs Number of Outputs: 1
Optical Outputs Return Loss: > 14dB
Wavelengths Standard: 1310nm, 1550nm (nominal)
Output Power 1310nm FP (Standard): -7dBm ±1dBm
Output Power 1550nm & CWDM DFB: 0dBm ±1dBm
Output Power DWDM DFB: 7dBm ±1dBm

Channel Analog Audio Fiber Transmitter 81 kb - Data Sheet

Project List

Find a Dealer