The
Modem-Internet is used for attaching any Gilderfluke & Co. system to the local wired ethernet network, and if it has a fixed IP address, to the internet at large. It allows you to use your computer to connect to the GilderGear, whether it is around the corner or on the other side of the world. Once connected, you can control the system, check its status, update shows and do anything else you can do through the GilderGears serial port.
- Ethernet:
- RJ-45 Connector
- LAN: 10/100 M bps ( Auto Detecting )
Protocols supported: ARP, IP, ICMP, UDP,TCP, HTTP, DHCP, PPPoE, FTP, PPPoM, SNMP
Modes: TCP Server/Client; UDP Client
Serial Ports: 1) RS-232, 1) RS-422/RS-485
Built-in RS-422/RS-485 Terminal Register
Speed: 300 bps to 230.4k bps
Setup via web browser (Safari, IE, Firefox, etc.), or RS-232 Console
Security: Setup Password & Connect Password
Protection:
1.5KV Magnetic Isolation on LAN port
15KV ESD protection for all signals
CPU:
32-bits ARM-7, 33 MHz
RAM: 2 Mbytes
ROM: 128 Kbytes
Firmware upgradable via Ethernet
Power: DC 9~12V, 500 mA. Power supply included
Led Indicators: SYS (PWR), LAN, LAN Rx, LAN Tx
Operating Temperature: 32° f to 122° f (0°c to 50°c)
Dimensions: 4.3" long x 2.75" wide x 1.2" thick (110mm long x 70mm wide x 30mm thick)
Weight: 5 Oz. (140 gm)
Approval: CE / FCC Approved
Actual unit may differ from that shown
Package Contents:
1 - Modem-Internet
1 - Gilder CD w/Software & Manuals
