4K UHD AV over IP Encoder, PoE, HDMI Pass-Thru, 2x IR/RS-232 Port
Model: KD-IP822ENC
Enterprise AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
Inter-System Compatibility: Fully compatible with KD-IP922ENC and DEC units / systems
Video Wall Processing: Encoder + Decoder systems create video walls with up to 4 total displays. Use KD-IP922DEC for larger video wall configurations
Control: 2 multi-function ports may be used as third-party control interface, Compass Control® Pro master controller, control extension via IP, or callable via KeyCode open API
The KD-IP822ENC is a 4K UHD AV over IP Encoder, PoE, HDMI Pass-Thru, 2x IR/RS-232 Port.
Enterprise AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
Inter-System Compatibility: Fully compatible with KD-IP922ENC and DEC units / systems
Video Wall Processing: Encoder + Decoder systems create video walls with up to 4 total displays. Use KD-IP922DEC for larger video wall configurations
Control: 2 multi-function ports may be used as third-party control interface, Compass Control® Pro master controller, control extension via IP, or callable via KeyCode open API
HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit
4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p at each decoder, enabling monitors to display content at optimal resolution at all times
Signal Extension: Up to 330ft. / 100m at 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or or point-to-point
Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
Redundant Power Connection: Added reliability for non-PoE integration. Power supply sold separately
Data Stream Bandwidth:
Latency:
Installation: Use KD-SMS16 to cleanly install up to twelve KD-IP822/ENC/DEC units in rack
HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60 f/s
EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected to Decoder
Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source and display, EDID Control handshake, and Hot Plug control
IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block
Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units
RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector
RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
Control System Support: Controllable by all IR, RS-232 and TCP/IP supported control systems via open API: Compass Control® Pro, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.
Compass Control® Pro Inside: Built-in 2 port Compass Control® Pro master controller.
KD-ProCL1/2/4/8 Software Activation License sold separately. Required to activate iOS controllers
AV-over-IP - Yes
Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Warranty - Yes
Number of Channels:
2
Warranty (Length/Type):
3 Years
KD-IP822DEC
- 4K UHD AV over IP Decoder, PoE, 2x IR/RS-232 Control Port