The ID66 is a 2-way full range loudspeaker designed for permanent installations. This low profile, high output, and weather resistant loudspeaker features two direct radiating 6.5” low frequency drivers, a 1.0” compression driver, and a passive crossover. The ID66 is ideally suited for under balcony installation, distributed systems, or other applications which require high output professional quality sound reproduction.

Mounting locations are distributed across 3 surfaces of the enclosure. Two Omni-mount™ compatible locations are available on the rear of the enclosure, while an additional 8 reinforced 1/4-20 UNC threaded locations are available for other mounting options. iDESIGN iDB™ Series U-bracket hardware is also available for single unit wall and ceiling mount installation.

The enclosure is constructed of 12-ply void-free birch hardwood plywood and is coated with a weather and wear resistant ProCoat™ polyurea hybrid finish. All rigging components are weather protected with a heat cured epoxy powder coat finish. Components in the front of the enclosure are protected by a curved grill made from perforated steel that is coated with heat cured epoxy powder, and lined with acoustically transparent foam.

One channel of discrete amplification and signal processing is required for this module. The preferred loudspeaker controller for all iDESIGN products is the McCauley M Series family of digital processing units. The System Design Group can help in creating a complete amplification and signal processing solution.