Multi-mode Fiber-optic Receiver Module, 1 DVI Video

Model: SR-1DV-0

Transmits 1 channel of DVI video over one fiber
Digital transmission of DVI video over one multimode fiber
Supports VGA, SVGA, XGA, SXGA and UXGA (640x480x60 to 1920x1080x60Hz)
HDTV resolution of 480p, 720p, and 1080p
H and V sync frequency range of 60 to 150Hz (vertical), 30 to 130kHz (horizontal)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ST/SR-1DV-0 system incorporates digital encoding technology. This fiber-optic module transmits 1 channel of DVI video over one fiber. This is multi-mode fiber system. The ST/SR-1DV-0 product is fully compatible with Meridians PC based SpectraSmart network management and diagnostic software system. SpectraSmart supervises the operating parameters of the transmission system such as the status on video levels, sync, digital carrier detect, voltages, temperatures and optical levels.

Transmits 1 channel of DVI video over one fiber
Digital transmission of DVI video over one multimode fiber
Supports VGA, SVGA, XGA, SXGA and UXGA (640x480x60 to 1920x1080x60Hz)
HDTV resolution of 480p, 720p, and 1080p
H and V sync frequency range of 60 to 150Hz (vertical), 30 to 130kHz (horizontal)
Uses all-digital processing and transmission for crystal-clear signals and no color skewing
Real-time video transmission for exceptional quality and resolution, no video compression
Auto detects, switches resolution and sync configurations
Requires no adjustments, equalization or de-skewing during setup
Data throughput in excess of 6Gbps (uncompressed)
Most systems have 1.25Gbps throughput with significant compression
Supports DDC (data display channel)
Ruggedized aluminum housing and face plate
Wide optical dynamic range: eliminates need for optical attenuators
Laser based systems for multi-mode and single-mode
Surface mount technology (SMT) for high reliability and repeatability
SpectraSmartTM network management compatible
Local LED status indicators to monitor critical
System diagnostics for performance parameters
ST and FC optical connector
Hot swappable cards
Laser back, biased photo detector circuitry for stable optical output over full temperature range

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - DVI
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): -29.20 F
Depth: 6.30 in
Height: 5 in
Width: 0.79 in
Product Weight: 0.99 lbs
Warranty (Length/Type): 10 Years

Multi-mode Receiver Module 610 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Quad Ethernet Fiber Transceiver, Dual Fiber, CWDM TX, High Sensitivity RX

by Evertz

Dual SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver, DWDM DFB Laser

by Evertz

Quad Ethernet Fiber Transceiver, Dual Fiber, DWDM TX, High Sensitivity RX

by Evertz