Active CCTV transmitter balun provides enhanced distance performance for single CCTV video channel via Cat5 unshielded twisted pair (UTP) cable. Balun is installed at CCTV camera and is powered by camera power supply. There are two (2) models, 500100 for 12Vdc cameras and 500101 for 24Vac cameras. Maximum distance supported ranges from 0 to 3000ft via Cat5 UTP when connected to passive CCTV baluns at receiver. Active CCTV transmitter balun features ground loop isolation and manual gain compensation adjustment based on cable length. Applications include Video enhancement for color, sharpness and brightness. Ground loop sensitive installations. Marginal cabling installations.
Low power consumption
Derives power from camera power supply
Ground loop isolation
Gain compensation switch for 500 to 3000ft
Fits inside CCTV dome cameras and back boxes
Works with other MuxLab CCTV baluns
Cable strain relief
Compatible with MuxLab CCTV baluns 500009, 500023. 500015, 500130, 500122
Balun Type - CCTV
Warranty - Yes
Spec Sheet available - Yes
Bandwidth:
DC to 8MHz
Composite Video Impedance:
75 ohms
Audio Impedance:
600 ohms (Minimum)
Maximum Input:
1.2 Vp-p (Unbalanced)
Maximum Output:
+/-5 V (Balanced)
Input Impedance:
75 ohms (BNC)
Output Impedance:
100 ohms (Screw Terminals)
Ground Loop Isolation:
Isolation between video input and output up to ±5V
Common Mode Rejection:
60 (15kHz), 40 (8MHz) dB (Typical)
Composite Video Maximum Distance (Cat5E/6 UTP):
2200 ft (670m)
Audio Maximum Distance (Cat5):
Up to 3000ft (0 to 914m) with passive balun (500009) at receiver, Up to 6000ft (0 to 1,828m) with active balun (500015 or 500120) at receiver