hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Pelco - ESTI335-5W
Request Quote

384 x 288 Wall-mount Thermal IP Camera with 35mm Lens, 120/230V AC Input Voltage

Series: Sarix TI

Model: ESTI335-5W

  • Long wave infrared (LWIR) camera
  • Esprit pan/tilt functions
  • IP and analog capability
  • 640 x 480 and 384 x 288 resolution options
  • 17µm pixel size (640 x 480 model)
Compare
Project List
Product Info
Tech Specs
Documents
Other Options
Sarix® TI Series thermal IP camera is an advanced thermal imaging pan/tilt system designed for easy integration into any new or existing video security application. The system is designed to provide detection, recognition, and identification of people and vehicles in any lighting condition, including complete darkness. Every Sarix TI Series features IP or analog outputs in same package and an integrated environmentally protected IP66 rated enclosure with Esprit® pan/tilt positioner, which can be controlled using IP/analog systems that use Coaxitron® or RS-422 Pelco D and Pelco P protocols. Additionally, when used in an IP system, the Sarix TI Series features a full suite of designed-for-thermal analytics.

At the core of the Sarix TI Series is an uncooled, sun-safe microbolometer, long-wavelength infrared (LWIR) camera that delivers up to 640 x 480 thermal video. These cameras feature an amorphous silicon detector, which has lower fixed pattern noise and a more uniform response than vanadium oxide detectors, while still maintaining high resolution and sensitivity when exposed directly to sun during normal daylight hours. Sarix TI Series is available in 640 x 480 and 384 x 288 resolution options. The camera has an input voltage of 24VAC/selectable power source of 120/230VAC.

In IP installations, the Sarix TI Series can support two simultaneous video streams. The two streams can be compressed in MJPEG and H.264 formats across several resolution configurations. The streams can be configured to variety of frame rates, bit rates, and group of pictures (GOP) structures for additional bandwidth administration. When used in analog installations, the Sarix TI Series supports camera control and limited camera setup using Coaxitron®, Pelco P and Pelco D protocols.

Sarix TI Series provides variable pan and tilt speeds ranging from 0.1 to 40 degrees per second in manual pan mode and 0.1 to 20 degrees per second in manual tilt mode. Pan preset and turbo speeds are 100 degrees per second in wind speeds of 50mph and 50 degrees per second in the 90mph wind-speed profile. Tilt preset speed is 30 degrees per second. The Sarix TI Series is capable of 360 degrees of continuous pan rotation. The tilt range allows for horizontal viewing of +33 to -83 degrees. Preset positions have preset accuracy of one-quarter degree. Sarix Thermal IP cameras are their ability to produce clear security images regardless of lighting conditions.

  • Long wave infrared (LWIR) camera
  • Esprit pan/tilt functions
  • IP and analog capability
  • 640 x 480 and 384 x 288 resolution options
  • 17µm pixel size (640 x 480 model)
  • 25µm pixel size (384 x 288 model)
  • Sensitivity below NETD <50mK at f/1.0
  • 24VAC or 120/230VAC, 50/60Hz selectable
  • H.264 and MJPEG compression
  • Ability to control and monitor video over IPv4 and IPv6 networks
  • Uncooled, sun-safe, amorphous silicon microbolometer
  • Built-in analytics
  • Variable speed pan, 0.1° to 100°/s with proportional pan
  • 360° continuous pan rotation
  • Tilt range of +33° to –83° from horizontal
  • Positioning, patterns, and multiple scan modes
  • Designed for minimal maintenance, no gears to adjust
  • Adaptive motion detection
  • Multiple lens options
  • Designed for maximum environmental protection
  • Compact, lightweight aluminum construction
  • Meets NEMA Type 4X and IP66 Standards
  • Complete with sun shroud and heater/defroster
  • Analog control using coaxitron, Pelco P, or Pelco D Protocols
  • ONVIF v1.02 conformant
  • Applications:
    • Perimeter security
    • Ports
    • Airport
 
Request Quote
 

Suggested Products