Source select switching systems are multi-level, configurable vertical interval systems available from 16x1 to 32x2. These systems meet the needs of video and audio professionals with high reliability for a minimum investment.
Configurable, inexpensive, and 'glitch free'
16x1 to 32x2 input/output
Synchronous vertical interval switching
Remote control option available
Switcher Connector Type - BNC
Switcher Connector Type - Other
Switcher Type - Audio
Switcher Type - Video
Switcher Video Signal Supported - Other
Spec Sheet available - Yes
Gain (sound):
3 dB
Input Impedance:
110 ohm
Output Impedance:
110 ohm
Total Harmonic Distortion + Noise (THD+N):
0.10 %
AC Voltage:
230 Volts
Analog Audio Bandwidth:
150 kHz
Analog Audio Frequency Response:
20 Hz to 20 kHz (+/- 0.1 dB)
Analog Audio Hum and Noise:
100 dB (below maximum output)
Analog Audio Crosstalk:
80 dB (worst case)
Digital Audio Input Cable Length:
500 ft (max, Belden 1800A)
Digital Audio Jitter:
20 nsec (max)
Analog Video Bandwidth:
150 MHz ( min, 16x1)
Analog Video Frequency Response:
0.1 to 100 MHz
Analog Video Hum and Noise:
- 80 dB (rms below 1Vp-p)
Analog Video Crosstalk:
> 55 dB (at 5 MHz)
Digital Video Data Rate:
143, 177, 270, 360 Mbps
Digital Video Input Cable Length:
1000 ft (max, of Belden 8281)