The E421B is comprised of 2 parts: a microphone and a battery box. The microphone can be connected directly with any "plug-in power" recording devices. For those devices with plug-in power, the microphone will be powered by the battery box with 4 AA alkaline batteries. A low cut ?lter is provided with the battery box for cutting out unwanted wind or handling noise. A 5-meter extension cable is included for setting the microphone away from the camcorder/recorder and close to the speakers or performers for capturing good sound. A simple rule for successful audio recording is the closer the microphone, the less problem.
Professional grade acoustic interference tube
High sensitivity condenser capsule
Rugged and light-weight ABS construction
Integrated and adjustable shock mount to reduce handling noise
Integral camera cold shoe mount
2-part design allows the microphone to connect directly to "plug-in power" recording devices
Supplied additional 5-meter cable for boom pole mount
4 AA batteries for easier field replacement
Low cut filter on battery box for cutting unwanted wind noise
Red cap to attract people to speak into it
Ideal for camera, flash recorder and digital recording
Microphone Connectivity - Wired
Microphone Type - Electret Condenser
Microphone Type - Shotgun
Sensitivity:
-34dBV/Pa (20mV)
Impedance:
200 ohm
Maximum SPL (Sound Pressure Level):
134 dB
Type:
Back electret
Polar Pattern:
Shotgun
Minimum Load Impedance:
1000 ohm
Signal to noise ratio:
74 dB
Power Requirements:
6V DC, 4 AA/UM3 battery, 6.7mA