The stylish and ergonomically designed chairman unit has all the necessary facilities to enable the user to chair a conference. It has excellent immunity to RF interferences from mobile phones. Similar in appearance to HCS-8313D Delegate Unit, the HCS-8313C Chairman Unit includes a microphone priority button. When pressed, the priority button causes all currently active delegate microphones to be switched off temporarily or permanently, allowing the chairman to take control of the meeting. The chairman unit can also be used to start or stop voting and turn off all active microphones. Channel selection is automatically limited to the number of language channels available.
Stylish and ergonomic design
Invisible microphone
Priority button
5 voting keys
Transmitting up to 64 CHs high quality digital audio signals on a dedicated 6-pin cable
Built-in channel selector consists of channel select keys and channel indicator display
Excellent immunity to RF interferences from mobile phones
“Closed Loop - Daisy Chain” connection topology
Supporting “PnP” (plug and play)
A suitable architectural room acoustics is needed when using an invisible microphone
Spec Sheet available - Yes
Maximum Power Consumption:
1.3 W
Headphone Frequency Response:
30Hz to 20 kHz
Earphone load impedance:
>16 ohm
Earphone Output:
10 mW
Color:
Light gray/Dark gray
Regulatory Compliance:
IEC 60914
Depth:
3.11 in
Height:
2.13 in
Width:
6.77 in
Product Weight:
1.10 lbs
Color:
Light gray/Dark gray
HCS-8313C
- Fully Digital Congress System Chairman Unit with Voting and Channel Selection