ZOOZ 800 Series Z-Wave Long Range S2 Toggle Dimmer Switch ZEN74 800LR
Model: S2 Toggle Dimmer ZEN74
On/off and dimming control of your lighting via Z-Wave (hub sold separately)
NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
NEW 3-WAY & 4-WAY WIRING: Still no add-on and use it in larger set-ups for multi-point control. Wires like the ZEN77 model; always follow the diagram in the manual, do NOT wire like the older ZEN23/ZEN24 switches. Neutral required.
Use with high-quality LED bulbs up to 100 W or incandescent bulbs up to 300 W (do NOT connect to tube lights, fans, halogen bulbs, transformers, switched receptacles, or CFL bulbs, FEIT bulb are NOT recommended)
ZOOZ 800 Series Z-Wave Long Range S2 Toggle Dimmer Switch ZEN74 800LR.
On/off and dimming control of your lighting via Z-Wave (hub sold separately)
NEW 800 chip: more range, faster signal, SmartStart inclusion + S2 security
Z-Wave Long Range ready: extend the wireless coverage up to 1300 feet if your hub supports Long Range
NEW 3-WAY & 4-WAY WIRING: Still no add-on and use it in larger set-ups for multi-point control. Wires like the ZEN77 model; always follow the diagram in the manual, do NOT wire like the older ZEN23/ZEN24 switches. Neutral required.
Use with high-quality LED bulbs up to 100 W or incandescent bulbs up to 300 W (do NOT connect to tube lights, fans, halogen bulbs, transformers, switched receptacles, or CFL bulbs, FEIT bulb are NOT recommended)
Improved hardware: smaller in the back (just 1.1" deep) to easily fit in shallow and crowded boxes; optimized antennae placement for stronger signal
Night Light Mode: press and hold the toggle down when dimmer is off to turn the light on to low brightness
Scene Control (select hubs only): activate scenes and trigger other devices with multi-tap
Multicolor LED indicator to guide you through the inclusion, exclusion, and reset process (LED indicator for diagnostic purposes only, not visible with the wall plate on)
Programmable double tap and single tap for truly customized control
Adjustable ramp rate and maximum/minimum brightness levels
OTA firmware updates for a future-proof device
Use a standard-size wall plate for single gang installations (wall plate not included)