Fibre Optic Systems : Fibre Optic Converters : Ensemble Designs - BE 10

Optical/SD SDI to Analog/SDI Converter

Series: BrightEye

Model: BE 10

Use with VCRs, cameras and satellite receivers
Analog video inputs and outputs
TBC and frame sync
12-bit processing
Passes embedded audio

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

This BrightEye 10 is a optical/SD SDI to analog/SDI converter with both SD SDI (electrical) and fiber optic inputs. Output formats include Beta and SMPTE component, RGB and composite (with simultaneous Y/C). Video processing, encoding and analog conversion is performed digitally at 12 bits of resolution with 8x oversampling. Front panel controls select between the optical and SDI input, choose the analog output format and adjust gain. Video levels can be adjusted through BrightEye Mac or PC software. The reclocked SD SDI output follows the input selector, thus providing optical to electrical conversion when the optical input is selected. BrightEye 10 combines fiber to SD SDI conversion and QC monitoring in one compact unit.

Use with VCRs, cameras and satellite receivers
Analog video inputs and outputs
TBC and frame sync
12-bit processing
Passes embedded audio
With both SD SDI and fiber optic inputs
Output format includes Beta and SMPTE component, RGB and composite

Warranty - Yes
Spec Sheet available - Yes

AC Voltage: 230 Volts
DC Voltage: 12 Volts
Peak Power: 4 Watt
Depth: 139.70 mm
Height: 20.32 mm
Width: 142.87 mm
Product Weight: 0.43 kg
Warranty (Length/Type): 5 years
Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Number of Serial Digital Input: 1
Serial Digital Input Signal Type: 270Mbps SD Serial Digital (SMPTE 259M)
Serial Digital Input Impedance: 75 ohms
Serial Digital Input Return Loss: >15 dB
Number of Optical Input: 1
Optical Input Type: SD (SMPTE 297M, Optical Equivalent of 259M)
Optical Input Wavelength: 830 to 1610 Nm
Optical Input Receiver Sensitivity: -18 dBm
Number of Analog Output: 1
Analog Output Types: Beta/SMPTE, Y, Pr, Pb/RGB/NTSC, PAL Composite/NTSC, PAL S-Video
Analog Output Return Loss: >40 dB
Number of Serial Digital Output: 1
Serial Digital Output Type: 270Mbps SD Serial Digital (SMPTE 259M)
Serial Digital Output Impedance: 75 ohms
Serial Digital Output Return loss: >15 dB
Serial Digital Output DC: <50 mV
SDI to Analog Performance Bit Resolution: 12 bits
SDI to Analog Performance Signal to Noise Ratio: >65 dB
SDI to Analog Performance Frequency Response: 0 to 5.5 MHz (+/-0.1dB)
SDI to Analog Performance K Factor: <1 %
Relative Humidity: 0 to 95 % (Non-condensing)

5BE26.pdf 531 kb - Data Sheet

Project List

Application Note - BrightEye Control Over Ethernet 543 kb - Other

Project List

Suggested Products

1-Channel 3G-SDI to Single Mode SC Fiber Transmitter

by AJA Video

1-Channel Single Mode ST Fiber to 3G-SDI Receiver

by AJA Video

1-Channel Single Mode LC Fiber to 3G-SDI Receiver

by AJA Video