Power Distribution : Power Distribution Equipment : Tripp Lite - EMS1250UL

1250W 12VDC PowerVerter Ambulance/EMS Inverter/Charger with 2 Hospital Grade Outlets

Series: POWERVERTER

Model: EMS1250UL

Supports 120Vac output from 120Vac line power source or 12Vdc battery source
DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10s
3-stage, selectable 14/55A battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire output passes 120V line power or inverter output through to connected equipment
Moisture-resistant construction enables vehicular or marine operation in high humidity environments

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Inverter with integrated charging system provides automatic, uninterruptible DC-to-AC power for critical on-board equipment. It is ideal for installation by ambulance/EMS vehicle manufacturers, dealer or EMS service for OEM, replacements and upgrades. It supplies up to 1250W of continuous 120Vac power to 2 AC outlets from any 12V battery or automotive DC source.

Supports 120Vac output from 120Vac line power source or 12Vdc battery source
DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10s
3-stage, selectable 14/55A battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire output passes 120V line power or inverter output through to connected equipment
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3-position operating mode switch supports auto mode to enable automatic transfer between DC and AC modes
Set of 6 front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size, battery equalization program and battery charger low/high/off settings
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop

Warranty - Yes
ROHS Compliant - Yes
UL Rated - Yes
Spec Sheet available - Yes

Number of Outlets: 2
UL Rated: Yes
AC Voltage: 120 Volts
DC Voltage: 12 Volts
Depth: 228.60 mm
Height: 177.80 mm
Width: 215.90 mm
Product Weight: 10.52 kg
Shipping Weight: 11.25 kg
Warranty (Length/Type): 30-month Limited
Frequency Compatibility: 60 Hz
Continuous Output Capacity: 1250 W
Peak Output Capacity: 2500 W
Output Nominal Voltage: 120 V
Overload Protection: Includes 12A input breaker dedicated to the charging system and 12A output breaker for AC output loads
Outlet quantity/type: 2 AC outlets
DC Maximum Input Full Continuous Load: 127 A (at 12Vdc)
AC Maximum Input: 32 A (at 120Vac)
DC Input Connection Type: 175A Anderson DC connector
AC Input Connection Type: NEMA 5-15P hospital-grade input plug
DC Battery System Voltage: 12 VDC
Battery Recharge Rate: 14/55 A (selectable)
Cooling Method: Multi-speed fan
Construction: Polycarbonate
Relative Humidity: 0 to 95 % (non-condensing)
Package Includes: EMS1250UL inverter/charger, instruction manual, warranty information, wired remote switch with full LED status indicators, 2 Anderson DC connectors
RoHS Compliant: Yes
ROHS Compliant: Yes

EMS Inverter/Charger 136 kb - Data Sheet

Project List

Suggested Products

RPCM Intelligent Mobile Power Distro Panel

by LynTec, Inc.