SmartPro 120V 2.2kVA 1.9kW Line-Interactive Sine Wave UPS, 4U Short Depth, Extended Run, Network Card Options, USB, DB9
Series: Smartpro
Model: SMART2200CRMXL
Offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures
Reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations
Runtime is expandable with optional BP48V48RT4U and BP48V24-2U reduced-depth external battery packs
Line interactive automatic voltage regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83 to 145V
Includes NEMA 5 to 20P input plug, NEMA 5 to 15R and 5 to 15/20R output receptacles
2.2kVA line interactive sine wave UPS with extended-run and SNMPWEBCARD options. Offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures. Reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations. 97% line power mode efficiency saves operating costs over less efficient UPS types. Runtime is expandable with optional BP48V48RT4U and BP48V24-2U reduced-depth external battery packs.
Offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures
Reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations
Runtime is expandable with optional BP48V48RT4U and BP48V24-2U reduced-depth external battery packs
Line interactive automatic voltage regulation (AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83 to 145V
Includes NEMA 5 to 20P input plug, NEMA 5 to 15R and 5 to 15/20R output receptacles
Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional SNMP/web management accessory card slot
Optional SNMPWEBCARD offers remote management and control of the UPS via direct network connection
Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and status of up to two directly connected contact closure sensors
HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X
97% efficiency in line power mode offers substantially lower operating costs than lower efficiency UPS types
Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once
Emergency power off (EPO) interface
Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices
3-stage metered current monitoring and battery charge status LEDs, utility power, voltage regulation LEDs, audible alarm and self-test
Field-replaceable, hot-swappable internal batteries and external battery packs
Warranty - Yes
Rackmountable - Yes
UL Rated - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
Cord Length (in/mm):
3048 mm
Estimated Runtime:
11 minutes
Output volt amp capacity:
2200 VA
Output Watt Capacity:
1900 W
Nominal Output Voltage (Supported):
120 V
Frequency Compatibility:
60 Hz
Built-in UPS output receptacles:
4 x 5 to 15R, 4 x 5 to 15/20R outlets
Rated input current (at maximum load):
16 A
Nominal Input Voltage (Supported):
120 VAC
Input Connection Type:
5 to 20P
Battery Full Load Runtime:
11 minutes (1900W)
Battery Half Load Runtime:
28 minutes (950W)
DC Battery System Voltage:
48 VDC
Primary Form Factor:
Rackmount
Shipping Dimensions:
12.8 x 23.3 x 22.8 inches
UPS housing material:
Steel
Cooling Method:
Fan
Package Includes:
Compact 4U rackmount UPS system, 2 post rackmount installation brackets, USB/serial cable and owner's manual