2.2kVA line interactive sine wave UPS with pre-installed SNMPWEBCARD. Enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Built-in auto-voltage regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options.
Automatic voltage regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA 5 to 20P input plug, 4 NEMA 5 to 15R and 4 NEMA 5 to 15/20R output receptacles, 2 independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 96% full load efficiency rating offers reduced power consumption and BTU emissions
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Front panel LCD monitoring screen with mode and enter buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Built-in USB, RS-232 and SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Built-in emergency power off (EPO) interface with cable
Ideal for server, networking and telecommunications equipment
Warranty - Yes
Rackmountable - Yes
UL Rated - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
Cord Length (in/mm):
3048 mm
Estimated Runtime:
4.50 minutes
Output volt amp capacity:
2200 VA
Output Watt Capacity:
1920 W
Nominal Output Voltage (Supported):
120 V
Frequency Compatibility:
60 Hz
Built-in UPS output receptacles:
4 x 5 to 15R, 4 x 5 to 15/20R outlets
Rated input current (at maximum load):
16 A
Nominal Input Voltage (Supported):
120 VAC
Input Connection Type:
5 to 20P
Battery Full Load Runtime:
4.5 minutes (1920W)
Battery Half Load Runtime:
12 minutes (960W)
DC Battery System Voltage:
48 VDC
Primary Form Factor:
Rackmount
Shipping Dimensions:
7.9 x 21.7 x 24.2 inches
UPS housing material:
Steel
Cooling Method:
Fan
Package Includes:
SMART2200RM2UN UPS system with pre-installed SNMPWEBCARD, PowerAlert software with USB/serial/EPO cable, 4 post rackmount installation kit and instruction manual