Signal Processing Systems : Decoders & Encoders : AMX - NMX-DEC-N2251

JPEG 2000 4K UHD Video over IP Decoder with KVM

Series: N2000

Model: NMX-DEC-N2251

Part #: FGN2251-SA

Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity.
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unlimited Scalability
Stand Alone or Card-Available as a stand alone device, or card for use with NMX-ACC-N9206

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

OVERVIEW

The NMX-ENC-N2151 4K Encoder and NMX-DEC-N2251 4K Decoder provide the same flexible, powerful, and scalable solution as the rest of the SVSI N2000 series at resolutions up to 4096×2160. JPEG 2000 compression allows Ultra HD media to be switched and distributed over standard gigabit Ethernet networks. Ultra HD signals from the NMX-ENC-N2151 encoder provided simultaneously as: 1) a JPEG 2000-compressed 900-Mbps stream through the RJ-45 connector and 2) an uncompressed stream through the small-form-pluggable (SFP+) connector compatible with fiber or copper*. Any source can be sent to any number of displays by routing through layer-3 switches. System scalability is limited only by uplink and stacking connector bandwidths but can accommodate up to 100 Ultra HD video sources at once.

Standard features like input and output scaling, bi-directional serial, IR, embedded 7.1 audio, and KVM-over-IP extension are included. The NMX-ENC-N2151-C and NMX-DEC-N2251-C form-factors are compatible with the NMX-ACC-N9206 card cage for high-density applications.

*4K UHD JPEG2000 compressed 900 Mbps through the RJ-45 connection available with a future firmware upgrade, expected release November 2015. Uncompressed transmission via fiber available now

COMMON APPLICATIONS

The NMX-DEC-N2251 is the perfect solution for matrix switching and distribution of HD, cinema-grade quality video over LAN. Common applications include enterprise, house of worship, entertainment, and stadiums.

Output Scaling-Video scaling at output allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelity.
Infrared (IR) -Infrared emitter connection allows control of low-cost, IR-only display devices
Onboard Control-All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devices
Unlimited Scalability
Stand Alone or Card-Available as a stand alone device, or card for use with NMX-ACC-N9206

Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
Decoder/Encoder Type - Other
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Certifications: FCC, CE
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 2 Amps
DC Voltage: 12 Volts
Regulatory Compliance: HDCP
Depth: 127 mm
Height: 26.67 mm
Width: 200.36 mm
Product Weight: 0.64 kg
Warranty (Length/Type): 3 Year Limited
Video:
- Video Input: Network video over Ethernet via RJ45 port
- Video Output: HDMI, DVI-D (through adapter)
- Formats: HDMI, DVI-D (through adapter), HDCP content protection support
- Output Resolutions
  - HDMI and DVI (Progressive)
    - Pixel clock between 27 MHz - 300 MHz
    - Minimum resolution of 720x480p
    - Maximum horizontal resolution of 4096 or a vertical resolution of 2160
4K UHD JPEG2000 compressed 900 Mbps through the RJ-45 connection available with a future firmware upgrade, expected release November 2015. Uncompressed transmission via fiber available now
Audio:
- Input Signal Types: Network video over Ethernet via RJ45 Output
- Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Digital-to-Analog Conversation: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to Encoder settings)
Latency:
- Latency: Latency is 16 ms for all unscaled resolutions. Scaling can add up to one frame (17 ms for 60 Hz or 33 ms for 30 Hz) of latency
Note: To calculate an end-to-end latency value, add the given Decoder latency (shown above) to your Encoder’s latency (which is provided in the Encoder’s Specifications sheet)
COMMUNICATIONS:
- Ethernet
  - P0
    - 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
  - p1
    - 10 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
Ports:
- +12V 2A: One 12 Volt DC power input.
- P0
  - 8-wire RJ45 female
  - 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
  - Provides network connection to the Encoders and Decoders
- P1: SFP+ port (SFP+ fiber transceiver or direct attach cable not included) for uncompressed networked AV video.
- IR
  - 2-pin terminal Phoenix connector
  - Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232
  - 3-pin terminal Phoenix connector
  - Provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate
- AUDIO
  - 5-pin terminal Phoenix connector
  - Provides user-selectable balanced/unbalanced input. Dedicated audio input
- HDMI OUT: HDMI video output
- USB connector (front panel): USB-B control input and two USB-A control inputs
CONTROLS AND INDICATORS – FRONT PANEL:
- RESET Button
  - Recessed pushbutton
  - Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
  - Recessed pushbutton
  - Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
  - On solid (green) when operating power is supplied (via PoE or local power supply)
  - This activity is also shown by the PWR LED on the rear panel
- STATUS LED
  - On flashing (green) when there is software activity
  - This activity is also shown by the STAT LED on the rear panel
Humidity: 10 to 90 % RH (non-condensing)
Heat Dissipation: Up to ~44 BTU/hr
General:
- Mounting Options
  - Stand alone, surface mount, wall mount, or rack mount
  - Surface and wall mounting requires (not included)
    - NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
  - Rack mounting requires one of the following (not included)
    - NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
    - NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units

Decoder 324 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

4K HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics Co., Ltd.

Modular, rackmount IP conversion platform: 2RU, 10-slot chassis for Modator encoding and decoding modules (including NDI)

by Magewell Electronics Co., Ltd.

HD HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics Co., Ltd.