Signal Processing Systems : Distribution Amplifiers : Australian Monitor - AMIS26

Distribution Amplifier, 2 Input, 6 Output

Model: AMIS26

2 inputs can be balanced or unbalanced and each input's sensitivity can be switched between Mic and Line level
Each of inputs is individually assignable to any of the 6 outputs via front panel DIP switches
6 outputs can again be balanced or unbalanced and feature up to -60dB of attenuation so they can be run as any combination of line level or mic level outputs
Input level controls are screw diver adjustable trim pots
Input level can boost or cut the input signal by up to 15dB

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The Australian Monitor Installation Series AMIS26 is a high quality 2 input, 6 output distribution amplifier. The AMIS26 provides a low noise, feature packed, signal routing solution to cover a wide range of installation needs, at a contractor friendly price.

2 inputs can be balanced or unbalanced and each input's sensitivity can be switched between Mic and Line level
Each of inputs is individually assignable to any of the 6 outputs via front panel DIP switches
6 outputs can again be balanced or unbalanced and feature up to -60dB of attenuation so they can be run as any combination of line level or mic level outputs
Input level controls are screw diver adjustable trim pots
Input level can boost or cut the input signal by up to 15dB
Recessed DIP switches assign either input A or B to a desired output
Output level controls are screw driver adjustable trim pots
This level control attenuates the output level, with a range from -60dB at "Minimum" position, to 0dBat "Maximum" position
Output Level DIP switch will change the output sensitivity of the desired output from Mic to line level
24V DC Phantom Power is also individually switchable per input
4 segment LED meters show the strength of each of the AMIS26's input signals
LED segments are calibrated to the following level markings and show the following colours -20dBu (green), -10dBu (green), 0dBu (yellow), +10dBu (red)
-24V DC Phantom power is also individually switchable per input

Spec Sheet available - Yes

Power Input: 24 VDC (regulated); 12VA max.
Outputs: Mic/Line Switch 28dB
Noise: -89dB
Frequency Response: (0dB/-3dB) 10Hz - 50kHz
Total Harmonic Distortion: Line In (XLR/RCA) 0.02%; Mic In (XLR) 0.1%
Crosstalk: Better than 80dB
Phantom Power: 24VDC
Input Sensitivity: Line (XLR) 775mV (0dB); Mic (XLR) 10mV (-37dB); Line (RCA) 775mV (0dB)
Dimensions: 44.0 x 482.0 x 168.0 (H x W x D) mm
Maximum load protection: Net 2.5 kg (5.5 lb), Shipping 3.0 kg (6.6 lb)

AMIS26 Spec Sheet 347 kb - Data Sheet

Project List

AMIS26 Manual 226 kb - Instructions

Project List

Find a Dealer

Suggested Products

Alfatron SUK4T HDBaseT Splitter Kit

by Alfatron Electronics, Inc.

openGear Dual 1x4 12G-SDI Distribution Amplifier

by AJA Video

HDMI/DVI USB KVM Splitter: 4-port

by Network Technologies Inc. (NTI)