Professional Conferencing System - Complete, Digital Matrix Mixer Conferencing Solution with Built-in Telephone Interface and Speaker Amplifier

Series:

Model: Converge Pro 880T

Part #: 910-151-881

Next-generation Distributed Echo Cancellation® on every mic input
Full bandwidth (20Hz to 22Khz) echo cancellation with improved duplex performance & push-to-talk microphone compatibility
Next-generation Noise Cancellation with adaptive modeling to room ambient noise condition
Increased resolution on Microphone Preamp stage(0-56 dB in 7 dB increments)
Pre-AEC routing for Sound Reinforcement Applications (Maximum of 4 millisecond processing delay)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

An eight microphone telephone hybrid with Distributed Echo Cancellation. The Converge Pro 880T combines the rich functionality of the Converge Pro 880 with a built-in telephone interface and speaker amplifier for standalone conferencing applications. The 880T delivers enhanced management features, simplified configuration tools, and industry leading expandability for virtually any venue or application.

Next-generation Distributed Echo Cancellation® on every mic input
Full bandwidth (20Hz to 22Khz) echo cancellation with improved duplex performance & push-to-talk microphone compatibility
Next-generation Noise Cancellation with adaptive modeling to room ambient noise condition
Increased resolution on Microphone Preamp stage(0-56 dB in 7 dB increments)
Pre-AEC routing for Sound Reinforcement Applications (Maximum of 4 millisecond processing delay)
Integrated Ethernet and USB connections
SNMP and HTML remote management agents
Event scheduler
Diagnostic console
Simplified Configuration Software
Drag & drop A/V and channel objects
Selectable views—unit, matrix, channel
Expanded Serial Command List
First-mic priority delivers clear audio to the far end
20 Hz-22 kHz bandwidth for full-range audio response
ALC & AGC keep participants’ audio balanced and consistent
Built-in telephone interface and 10W power amplifier
Scalable – link multiple Converge/Converge Pro units (Converge Pro 880, 880T, 840T, 8i, TH20, and Converge SR 1212) for extensive microphone coverage and up to 16 phone lines
Enhanced expansion bus, featuring 12 mix-minus audio buses for routing between units
Eight mic gating groups (four internal & four global) allow separation of mics into individual mixer gating groups for greater configuration flexibility
32 presets can be executed on-the-fly without disturbing other ongoing preset operations
255 Macros for customized audio control/configuration with single command execution

Audio Conferencing System Type - Desktop
Warranty - Yes
ROHS Compliant - Yes
Dante Enabled - Yes
Spec Sheet available - Yes

Audio Performance Conditions: Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting)
Noise (EIN): -126 dBu, 20 kHz BW, max gain, Rs=150 ohms
Crosstalk: <-91 dB re 20 dBu @ 20 kHz channel to channel
Auto Mixer Parameters:
- Number of Open Microphones (NOM)
- PA Adaptive Mode
- First Mic Priority Mode
- Last Mic Mode
- Maximum # of Mics Mode
- Ambient Level
- Gate Threshold Adjust
- Off Attenuation Adjust
Matrix Mixing Parameters:
- 37x38 mixing matrix
- 12 analog in/out
- 12 expansion bus in/out
- 8 assignable processing blocks in/out
- 4 assignable fader blocks in/out
- 1 10W speaker amplifier
- 1 telco input/1 telco output
Assignable Processing Blocks:
- Filters
  - All pass
  - Low pass
  - High pass
  - Low shelving
  - High shelving
  - Parametric EQ
  - Notch
  - CD Horn
- Crossovers
  - Bessel
  - Butterworth
  - Linkwitz-Riley
- Compressor
- Delay; adjustable up to 250 ms
Assignable Fader Blocks: Gain/Mute
Microphone Input Configuration:
- Input Gain Adjust
- Mic or Line Level
- Phantom Power on/off
- Echo Cancellation on/off
- Noise Cancellation on/off
- Filters
  - All Pass
  - Low Pass
  - High Pass
  - Notch
  - PEQ
- Mute on/off
- Chairman Override on/off
- AGC on/off
- Automatic Level Control on/off
- Auto Gate/Manual gate
- Adaptive Ambient on/off
- Pre-AEC channel
Mic/Line Inputs 1-8:
- Push-on mini-terminal block,
- balanced, bridging
- Impedance: < 5 K ohms
- Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment)
- Maximum Level: -65 dBu to +20 dBu
- Echo Cancellation: 130 ms tail time (works with 12 dB of room gain)
Line Inputs 9-12:
- Push-on mini-terminal block,
- balanced, bridging
- Impedance: < 5 K ohms
- Nominal Level: 0 dBu
- Maximum Level: 20 dBu
Outputs 1-12:
- Push-on mini-terminal block, balanced
- Impedance: < 50 ohms
- Nominal Level: 0 dBu
- Maximum Level: 20 dBu
Amplifier Output:
- Binding Post Connection
- 10 Watts @ 4 ohm Impedance
- THD + Noise: < 0.5%
Telco Line Port:
- RJ-11 POTS (plain old telephone
- service) or analog PBX extension
- A-lead supervision provided
Telco Set Port: Pass-though RJ-11 analog jack
Telephone Audio Performance:
- Conditions: Unless otherwise
- specified, all measurements are
- performed with Transmit Limiter and
- Receive ALC disabled
- Frequency Response: 250Hz to 3.3 kHz ±1dB
- THD+N: <0.3% re-max level 250 Hz to 3.3 kHz
- SNR: > 62 dB re-max level
Telco Line Echo Cancellation:
- Tail Time: 31 ms
- Null: 55 dB nominal
Telephone Noise Cancellation: Noise Cancellation 6-15 dB attenuation
Expansion Bus In/Out:
- Proprietary Network RJ-45
- (2), 1.9 Mbps
- CAT-5 twisted-pair cable, 200’ maximum cable length
Ethernet:
- Autoswitching with Quality of Connection (QoC)
- 10/100 Mbps Ethernet Network Port
- 10/100 Mbps Ethernet PC Port
- RJ-45 Connectors
RS-232:
- Serial Command Protocol Only (Console software not supported on RS- 232 port)
- DB-9 female
- 9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, 1 stop bit, no parity Hardware flow control on (default)/off
Control/Status Ports:
- DB-25 female A/B (2)
- Inputs A/B: active low (pull to ground)
- Outputs A/B: open collector, 40 VDC max, 40 mA each
- +3.3 VDC pins (2) (300 mA overcurrent protected)
USB:
- Version 2.0 compatible
- Type: B-connector
Configuration & Admin Software: Converge™ Console
Power Input Range:
- Auto-Adjusting
- 100–240 VAC; 50/60 Hz
Dimensions (L x D x H):
- 17.25” x 10.25” x 1.75”
- 43.8 x 26 x 4.5 cm
Approvals: See the Installation & Operation Manual for complete details AES48-2005: AES standard on interconnections, Grounding and EMC practices, Shields of connectors in audio equipment containing active circuitry self certified
Optional Accessories:
- Converge Pro 880
- Converge Pro 840T
- Converge Pro 8i
- Converge Pro TH20
- Converge SR 1212
- Tabletop Controller
Part Number: 910-151-881 Converge Pro 880T 8-Channel AEC Microphone Mixer with Telephone Hybrid and 10W Amplifier
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): -10 C
Maximum Frequency Response (Bandwidth): 22 kHz
Maximum Frequency Response (Bandwidth): 22000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Crosstalk: -91 dB
Dynamic Range: 100 dB
ROHS Compliant: Yes
Total Harmonic Distortion + Noise (THD+N): 0.02 %
Active Power: 30 Watt
Depth: 260.35 mm
Height: 44.45 mm
Product Weight: 3.40 kg
Shipping Weight: 5.44 kg
Warranty (Length/Type): 2 years

3 yr Extended Warranty (Converge Pro 880T) - 3-year Extended Warranty for Converge Pro 880T

Converge Pro 840T - Professional Conferencing System - Complete, Digital Matrix Mixer Conferencing Colution with Built-in Telephone Interface and Speaker Amplifier

Converge Pro 880 - Professional Conferencing System - Complete, Digital Matrix Mixer Conferencing Solution with Rich Functionality and Legacy ClearOne Audio Performance

Converge Pro 8i - Professional Conferencing Input Expansion System

Converge Pro TH20 - Professional Conferencing Telephone Interface

Converge Pro White Paper 1438 kb - Other

Project List

Converge Pro vs. XAP Comparision 45 kb - Other

Project List

ClearOne - ConvergePro 880T Datasheet.pdf 189 kb - Data Sheet

Project List

802-151-881-Rev1.1_ConvergePro_880T-DS-WEB1.pdf 134 kb - Other

Project List

Manual
CONVERGE Pro Audio Conferencing System

Find a Dealer