Signal Processing Systems : Receivers & Transmitters (Wired) : Clockaudio - GT-520T

Rack Mountable Transmitter

Series: GT-400 Series

Model: GT-520T

Circuitry uses a high stability PLL synthesised UHF transmitter designed for use on licensed free UHF FM 863-870 MHz frequencies
It has 16 programmed preset switchable channels
Antenna is a BNC swivel Helical wound type developing 10mW ERP
Audio metering is via 5 LEDs mounted on the front panel, audio Inputs 3
Pin XLR - 6.35mm Jack Plug (balanced input) - RCA audio output sockets 1 x 6.35mm and 1 x 3.5mm headphone Jack plug sockets – DC input 3.5mm Jack socket

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The GT-520T is a rack mountable transmitter and circuitry uses a high stability PLL synthesised UHF transmitter designed for use on licensed free UHF FM 863-870 MHz frequencies. It has 16 programmed preset switchable channels. The antenna is a TNC swivel Helical wound type developing 10mW ERP. Audio metering is via 5 LEDs mounted on the front panel, audio Inputs 3 Pin XLR - 6.35mm Jack Plug (balanced input) - RCA audio output sockets 1 x 6.35mm and 1 x 3.5mm headphone Jack plug sockets – DC input 3.5mm Jack socket. Power Supply is provided by an external 12V DC 500mA supply. Operating range in free air (open field) 100 Metres.

Circuitry uses a high stability PLL synthesised UHF transmitter designed for use on licensed free UHF FM 863-870 MHz frequencies
It has 16 programmed preset switchable channels
Antenna is a BNC swivel Helical wound type developing 10mW ERP
Audio metering is via 5 LEDs mounted on the front panel, audio Inputs 3
Pin XLR - 6.35mm Jack Plug (balanced input) - RCA audio output sockets 1 x 6.35mm and 1 x 3.5mm headphone Jack plug sockets – DC input 3.5mm Jack socket
Power Supply is provided by an external 12V DC 500mA supply. Operating range in free air (open field) 100 Metres
Rotary controls: Aux / mic / headphone volume
AC Adaptor: 12 VDC 500mA (115-230VAC)

Wireless Receiver Transmission - FM
Wireless Receiver Transmission - UHF
Wireless - Yes
Spec Sheet available - Yes

DC Voltage: 12 Volts
Product Weight: 1.20 kg
Dimensions: 215 x 220 x 44 mm
Supplied Accessories: AC Adaptor: 12 VDC 500mA (115-230VAC)
AC Voltage (Maximum): 230 Volts
AC Voltage (Minimum): 115 Volts

Rack Mountable Transmitter 189 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

UCX Matrix Switcher Receiver with HDMI 2.0 inputs and USB 3.1 Gen1 host ports

by Lightware

HDBaseT Receiver 330'/600' with Dual Relay & Audio Line In/Out

by Aurora Multimedia Corporation

Transmitter OMNEO

by Bosch Conferencing and Public Address Systems