Microphones : Microphone Systems (Packages) : Earthworks, Inc. - FW430TPBmp

Cardioid 4.7 ft model with tripod base - matched pair in black only

Series: FlexWand Series

Model: FW430TPBmp

Matched pair
Uniform frequency response on or off axis
Frequency response of 30Hz to 30kHz
Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
Large flex section near the center of the stand that couples the stand and the wand

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The FlexWand™ is a combination of a 30kHz High Definition Microphone™ and a low profile microphone stand and boom as a single unit. It allows the microphone head to be positioned as high as 4.7 feet and as low as 10 inches from the floor or anywhere in between. There are no visible wires or cables above floor level. Visually it is low profile, smooth, sleek and clean. The FlexWand™ is the ideal solution for applications where the utmost in sound quality and a low profile is required. Now you don’t have to find a mic, attach the mic clip to the stand and then dress the cable around the stand. Just pick up the FlexWand™, position it and plug the mic cable into the base.

Matched pair
Uniform frequency response on or off axis
Frequency response of 30Hz to 30kHz
Near perfect polar response and the ability to reject sounds from the rear of the microphone, making it a perfect solution for choirs and vocal groups
Large flex section near the center of the stand that couples the stand and the wand
Mini-gooseneck between the end of the wand and the microphone head
Substantial improvement in gain before feedback
Will handle high sound pressure levels with high rejection of sounds to the rear of the microphone
Ideal where bands or orchestras are placed in front of a choir, as the FlexWand™ will reject much of the sound of the band or orchestra
The near perfect polar response of the FlexWand™ allows the use of fewer microphones on choir, with better sound quality, no spotlighting and incredible rejection of sounds from the rear of the microphone
Tripod base
Made in USA

Microphone Connectivity - Wired
Microphone Type - Condenser
Microphone Type - Electret Condenser
Warranty - Yes
Polar/Pickup Pattern - Cardiod
Polar/Pickup Pattern - Hypercardiod
Spec Sheet available - Yes

Depth: mm
Height: 1390 mm
Noise: 16 dB
Minimum Frequency Response (Bandwidth): 30 Hz
Maximum Frequency Response (Bandwidth): 30 kHz
Signal to Noise Ratio: dB
Maximum Frequency Response (Bandwidth): 30000 Hz
Minimum Frequency Response (Bandwidth): 0.03 kHz
Impedance: 100 ohm
Maximum SPL (Sound Pressure Level): 145 dB
Sensitivity: -40 dBV
Wireless: No
Colour: Black
Noise: 22 dBA
Warranty (Length/Type): 15 Years
Mic Maximum Frequency Response: 30 kHz
Mic Maximum Frequency Response: 30000 Hz
Mic Minimum Frequency Response: 30 Hz
Mic Minimum Frequency Response: 0.03 kHz
Number of Mics Supplied: 2

FW430 Data Sheet 1472 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

SL BOUNDARY SET DW-4 US - SpeechLine Digital Wireless microphone set. Includes (1) SL Boundary 114-S DW, (1) SL Rack Receiver DW with power supply, (1) USB cable, (1) BA 40 rechargeable battery & (1) GA 4 rackmounting kit

by Sennheiser

ADECIA Ceiling Solution

by Yamaha Commercial Audio Systems, Inc.

SL TS 133 GN SET DW-4 US - Wireless table mic set. Includes (1) SL Tablestand 133-S DW, (1) MEG 14-40 B gooseneck microphone (cardioid, condenser), (1) BA 40 rechargeable battery, (1) SL Rack Receiver DW, (1) power supply & (1) & GA 4 rackmount kit

by Sennheiser