Signal Routing / Switching : Switchers : Kramer Electronics Australia - KIT-400

4K Auto-Switcher/Scaler Kit over Long-Reach HDBaseT

Model: KIT-400

Part #: 87-00002190

Simple and Powerful Maestro Room Automation - Intuitive user interface enables you to fully automate your meeting room elements.
HDMI Signal Extension - HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
PoC (Power over Cable) Enabled - Choose to power only one of the units and power the other unit of the receiver/transmitter pair over the HDBaseT extension.
Local Switching Control of 3 Local and 1 Remote Source - Select from 4 sources, each with a dedicated selector button on the transmitter front panel, to output to an HDMI display: 2 HDMI inputs and 1 VGA input, with dedicated audio jack, on the transmitt
Audio De-embedding - Output the HDMI audio to a balanced stereo output on the receiver side, and an unbalanced stereo output on the transmitter side.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

KIT-400 is a high-performance auto-switcher/scaler kit for 4K HDMI™ and VGA over long-reach HDBaseT. The kit includes the KIT-400T transmitter/switcher and the KIT-400R receiver/scaler. The KIT-400T transmitter converts the user-selected input signal into the transmitted HDBaseT signal. The KIT-400R receiver receives the HDBaseT signal, converts it to HDMI and up- or down-scales the picture to match the resolution of the HDMI monitor. KIT-400 extends video signals to up to 40m (130ft) over CAT copper cables at up to 4K at 60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.

Simple and Powerful Maestro Room Automation - Intuitive user interface enables you to fully automate your meeting room elements.
HDMI Signal Extension - HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
PoC (Power over Cable) Enabled - Choose to power only one of the units and power the other unit of the receiver/transmitter pair over the HDBaseT extension.
Local Switching Control of 3 Local and 1 Remote Source - Select from 4 sources, each with a dedicated selector button on the transmitter front panel, to output to an HDMI display: 2 HDMI inputs and 1 VGA input, with dedicated audio jack, on the transmitt
Audio De-embedding - Output the HDMI audio to a balanced stereo output on the receiver side, and an unbalanced stereo output on the transmitter side.
Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling, processing and pass-through algorithm that ensures Plug and Play operation.
Easy Remote Device Control - Control devices connected to KIT-400 from the user-friendly Kramer Aware interface on the KIT-400 embedded webpages. You can also access the interface using the Kramer Aware app on a compatible Kramer touch panel.
Convenient Unit Control and Configuration Options - Local control via front panel source and output switching buttons, DIP-switches for configuring connection priority, and OSD menu. Distance control via user-friendly embedded web pages via Ethernet, Pro
Easy, Cost-effective Maintenance - Local firmware upgrade via USB connector.
Easy and Elegant Installation - Single cable connectivity for both HDBaseT signals and power. Compact MegaTOOLS™ fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 2 units in a 1U rack space with the recommended rack adapter.
Application:
Classrooms and lecture halls
Meeting rooms
Training facilities
Collaborative classrooms
Any space where BYOD support is required

Switcher Connector Type - HDMI
Switcher Type - Audio
Switcher Type - Video
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
DC Voltage: 12 Volts
Depth: 115.06 mm
Height: 25.40 mm
Shipping Depth (with packaging): 234.95 mm
Shipping Height (with packaging): 55.12 mm
Shipping Width (with packaging): 445.01 mm
Width: 187.45 mm
Product Weight: 1.18 kg
Shipping Weight: 2 kg
Regulatory Compliance: CE, FCC, UL
TRANSMITTER INPUTS/OUTPUTS: INPUT: 2 HDMI: On female HDMI connectors, 1 VGA: On a 15-pin HD connector, 1 Unbalanced Audio: On a 3.5mm mini jack. OUTPUTS: 1 HDBaseT: On an RJ-45 connector, 1 Unbalanced Audio: On a 3.5mm mini jack
Ports: 1 Ethernet: On an RJ-45 connector, 1 Control RS-232: On a 3-pin terminal block connector, 1 Data RS-232: On a 3-pin terminal block connector, 1 Remote Contact-Closure: On a 4 pin terminal block connector, 1 Service USB: On a mini-USB connector for firmware upgrade
RECEIVER INPUTS/OUTPUTS: INPUTS: 1 HDBaseT: On an RJ-45 connector, 1 HDMI: On female HDMI connectors. OUTPUTS: 1 HDMI: On female HDMI connectors, 1 Balanced Audio: On a 5-pin terminal block connector. PORTS: 1 Control RS-232: On a 3-pin terminal block connector, 1 Data RS-232: On a 3-pin terminal block connector, 1 Remote Contact-Closure: On a 4 pin terminal block connector, 1 Relay: On a 3-pin terminal block connector, 1 Program USB: On a USB-A connector for firmware upgrade
Video: Max Data Rate (on the HDMI ports): KIT-400R: 18Gbps, KIT-400T: 10.2Gbps, Max Resolution (on HDMI ports): KIT-400R: 4K at 60Hz (4:4:4), KIT-400T: 4K at 60Hz (4:2:0), HDMI Support: 4K60, CEC, xvYCC color, Content Protection: HDCP 1.4 and 2.2 (KIT-400R), KIT-400R Output Resolutions: 640x480 at 60Hz, 800x600 at 60Hz, 1024x768 at 60Hz, 1280x768 at 60Hz, 1280x800 at 60Hz, 1280x1024 at 60Hz, 1360x768 at 60Hz, 1400x1050 at 60Hz, 1440x900 at 60Hz, 1600x1200 at 60Hz, 1680x1050 at 60Hz, 1920x1200 at 60Hz RB, 2560x1600 at 60Hz RB, 1920x1080 at 60Hz, 1280x720 at 60Hz, 2048x1080 at 50/60Hz, 2560x1440 at 60Hz RB, 720x480p at 60Hz, 720x576p at 50Hz, 1280x720p at 50/60Hz, 1920x1080p at 24/25/30/50/60Hz, 2560x1080p at 50/60Hz, 2K at 24/25/30/50/60Hz, 4K at 24/25/30/50/60Hz
EXTENSION LINE: Up to 40m (130ft): At 4K at 60Hz (4:2:0), Up to 70m (230ft): At full HD (1080p at 60Hz)
Extended RS-232: Baud Rate: 300 to 115200
User Interface: Control: Input selection buttons, DIP-switches, remote contact-closure switches, relay switches. Kramer API via RS-232 serial commands transmitted by a PC, touch screen system or other serial controller, embedded web pages via LAN for configuration and control, Indicators: Power, link, input selection LEDs
Storage Temperature: -40 to +70 Degrees C (-40 to 158 Degrees F)
Humidity: 10% to 90%, RHL non-condensing
Enclosure: Size: MegaTOOLS®, Type: Aluminum, Cooling: Convection ventilation
Accessories: Included: 1 Power adapter, 8 rubber feet, 2 bracket sets

Switcher/Scaler Kit 290961 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Universal Switcher Transmitter

by Lightware

Universal Switcher Transmitter

by Lightware

Taurus UCX 4x2 Matrix with USB-C, HDMI2.0 and USB3.1 Ports

by Lightware