Cables & Connectors : Connectors : Neutrik - NO2-4FDW-A

Chassis Connector, Black Chromium Plating, 4 Solder Contacts

Model: NO2-4FDW-A

Suggested OEM equipment connector due to LC front compatibility
Designed as feedthrough with automatic sealing shutter
Shutter with silicone gasket protects optical connection from dust and dirt
Accommodates standard LC connectors on the rear for simple installation
Connection on the front side either by rugged opticalCON or standard LC connector

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The chassis connector acts as feed-through allowing simplified installations by connecting conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Colored sealings are included to identify the fiber mode.

Suggested OEM equipment connector due to LC front compatibility
Designed as feedthrough with automatic sealing shutter
Shutter with silicone gasket protects optical connection from dust and dirt
Accommodates standard LC connectors on the rear for simple installation
Connection on the front side either by rugged opticalCON or standard LC connector
Low cost of chassis connector makes it viable alternative to traditional connectors in fixed installations
Water resistant according to IP65 ingress protection in mated condition
In case of limited space the chassis can be mounted without rubber gasket. IP rating for this is IP 52.
Color coded rubber sealing to identify fiber mode multimode – black, single mode PC – blue, single mode APC - green

Connector Product Type - Audio
Connector Product Type - Data
Connector Product Type - Video

Construction: Brass, Zinc diecast
Current Draw: 6 Amps
Regulatory Compliance: IEC 60664-1
Gender: Female
Contact Resistance: < 7 milliOhms (inner)
dielectric strength: 1.5 kVdc
Insulation Resistance: > 2 gigaohms (initial)
Lifetime: > 5000 mating cycles
Locking force: 1000 N
Locking Device: Push-Pull
Mounting Direction: front
Chassis Shape: D
Optical Connector: LC-Duplex Feedthrough
Temperature Range: -30 to +80 °C
AC Voltage: 50 Volts

NO2-4FDW-1-A - opticalCON DUO Chassis Connector, Black Chromium Plating, 4 Solder Contacts, 1 Shell Ground Contact

Data Connectors 5489 kb - Other

Project List

Find a Dealer

Suggested Products

1394a Firewire Cables

by Network Technologies Inc. (NTI)

1394a Firewire Cables

by Network Technologies Inc. (NTI)

Expanded Beam Junior (HMA) Optical Connector, Multi-mode

by Lightware