Signal Routing / Switching : Patchbays, Panels & Assemblies : Neutrik - NYS-SPP-L1

Patch Panel with 24 x 1/4" Dual Jack, Half Normalled Bottom Row

Series: NYS

Model: NYS-SPP-L1

Individual grounding available for each channel separately
Rugged metal housing
Improved contact design minimizes wear on mated plugs
Economic and versatile designed 1/4" modular patch panel with 2 rows of jack sockets
48 balanced channels with fully PCB wired jack (24 vertical PC boards), 24 front pairs and corresponding 24 rear pairs

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The NYS-SPP-L1 is a economical and remarkable sleek designed 1/4“ modular Patch Panel for 19“ rack mount (19“ x 1U) with a reinforced metal housing. Each of it‘s 48 PCB wired balanced channels (24 front pairs and corresponding 24 rear pairs) can either be grounded separately or in groups of individually chooseable channel numbers. The PCBs are held securely in place by being clamped between the front and the rear panel, this grants an easy reconfiguration of the Patch Panel without the danger of loosing any small parts (e.g. nuts). The grey jack serves as an easy and distinguishable normalling identification.

Individual grounding available for each channel separately
Rugged metal housing
Improved contact design minimizes wear on mated plugs
Economic and versatile designed 1/4" modular patch panel with 2 rows of jack sockets
48 balanced channels with fully PCB wired jack (24 vertical PC boards), 24 front pairs and corresponding 24 rear pairs
Jack PC card contains 4 balanced 1/4" jacks with non-tarnishing contacts, is held securely in place without the use of nuts - no little pieces to drop, break or lose
Easy to change configuration by just flipping individual PC board
Normalling jack is colored grey for easy identification
4 designation strips included for front and rear panel

Patchbay Interface/Port Type - 1/4-inch

Depth: 64 mm
Operating Temperature (Maximum): 80 C
Operating Temperature (Minimum): -30 C
Construction: ABS Shell with tin plated bronze contact and steel front
Rack Units (Height): 1
Height: 44 mm
Width: 482 mm
Connection Type: Patch Panel
Signal Type: AES/EBU Signals (digital)
Contact Resistance: <10 milliOhms (inner)
Comment: <10
dielectric strength: 1 kVdc
Frequency Range: DC to >50 MHz
Insulation Resistance: >1Gigaohm at 500Vdc
Channel Separation: >100dB at 10kHz, 600 terminated
Handles phantom power: Yes
Insertion Force: <20 N
Withdrawal Force: >10 N
Lifetime: >10000 mating cycles
Locking Device: Retention spring
Suitable connectors: A-Gauge 1/4'' plugs acc. EIA RS-453
Channels: 2 x 24 channels, configuration half normalled, isolated, split

Patch Panels 3251 kb - Other

Project List

Find a Dealer

Suggested Products

Source Assignment Panel for Channel Assignment

by RTS

48 port Cat6 patch panel

by Comprehensive Video Group (VCOM)

ConferX HDMI/USB-C Wall Plate Transmitter via HDBaseT

by AVPro Edge