• Signal Generator Type - Audio
• Tester Format - Other

• Operating Temperature (Maximum): 55 C
• Operating Temperature (Minimum): 0 C
• Control Inputs: 1 to ramp up, 1 to ramp down
• Input Logic: External closure pulls normally low input to +15 Vdc to activate UP or DOWN function
• Indicator Outputs: 1 to drive red LED (partial to fully OFF)
  1 to drive green LED (partial to fully ON)
• LED Output Current: 0 to 3 mA (to drive low current, high intensity LEDs)
• Ramp Output: 0 to 10 Volts nominal, (typical < 0.1 V to > 9.8 V under ST-VCA2 load)
• Minimum Step: 200 mV nominal
• Ramp Time: 5 seconds nominal (fully off to fully on; or fully on to fully off)
• Power Requirement: 24 to 33 VDC @ 40 mA

DRA-35S
STICK-ON DIN Rail Adapter

DRA-35S6
STICK-ON DIN Rail Adapter

DTB
STICK-ON® Series Detachable Terminal Block

MB-1
Mounting Kit - RU, ST and TX Series

MB-2
Mounting Kit - RU and TX Series

MSR-1
Snap Rail Adapter - STICK-ON Series

SMK-12
STICK-ON Mounting Plate

SR-10
STICK-ON Series Mounting Rack - 10 Modules

SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

SR-4
STICK-ON Series Mounting Rack - 7 Modules max.

STR-19A
STICK-ON Series Racking System - 12 Modules

STR-19B
Hinged 19-inch Rack Mount Panel