Camera Auxiliary Equipment : Related Camera Auxiliary Products : Sound Control Technologies - RCU2s-C10

RemoteCamRCU2s™ [USB2.0 + UVC + 5/12V Camera Power]

Model: RCU2s-C10

Extends camera power (no factory camera PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
Simple Plug & Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Other Options

Expanding on the reliable and time-tested technology of SCT’s RemoteCam™ platforms, the RemoteCamUSB2S™ is part of Sound Control Technologies’ next generation product portfolio for USB PTZ cameras requiring USB & UVC/RS232 Visca control. The RemoteCamUSB2S™ camera Extension Kits offer a cost and time saving alternative when integrating USB PTZ cameras into a wide variety of presentation spaces. The RemoteCamUSB2S™ Kits provide a reliable “transparent“ link between the camera and codec/head-end.

Extends camera power (no factory camera PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
Simple Plug & Play installation, no programming required.
Allows pass-through of manufacturer firmware updates from codec to camera.
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
Field-upgradable firmware via microSD Card
kits Provide:
12V or 5V Camera Power (Up to 3A)
USB-A 5V Camera Power (Up to 1.2A)
USB Video Typically up to 1080p30/720p60
UVC & RS232 Visca Camera Control
Analog Audio I/O
Visca Control Loop
Wired and Modulated IR
MicroSD Slot
Distances up to 100M over a single CAT5e or CAT6 UTP cable

Warranty - Yes
Spec Sheet available - Yes

Warranty (Length/Type): 3 Years
AC Voltage (Maximum): 240 Volts
RCU2S-CE™ Camera End Module: • Imperial Dims: H: 0.789” x W: 2.264” x D: 3.725”, • Metric Dims: H: 20mm x W: 57mm x D: 94mm, • Weight: 0.2 lbs / 90g
RCU2S-HE™ Head End Module: • Imperial Dims: H: 1.448” x W: 3.814” x D: 3.578”, • Metric Dims: H: 36mm x W: 96mm x D: 90mm, • Weight: 0.4 lbs / 181g
WPS-12™ Power Supply (Included): • Imperial Dims: H: 1.19” x W: 1.85” x D: 4.65”, • Metric Dims: H: 30mm x W: 47mm x D: 118mm, • Weight: 0.5 lbs / 236g, • Input: 100 to 240VAC, 47-63Hz, 1.45A Max, • Output: 30VDC, 2A Max, • Output Connector: 5.5mm x 2.5mm DC Barrel

RemoteCamUSB2S 581986 kb - Data Sheet

Project List

Digital PTZ Camera Extension Kits

by Sound Control Technologies

Model: RemoteCamUSB2S™