Signal Processing Systems : Extenders : Tripp Lite - B127A-111-BHTH

HDMI over Cat6 Extender Kit, Transmitter and Receiver with Repeater, 4K 60Hz, 4:4:4, IR, HDR, PoC, 230 ft., TAA

Model: B127A-111-BHTH

Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy
Power over Cable (PoC) technology provides power to the transceiver via Cat6 cable
Transmitter’s local port shows you the 4K image being displayed at the other end
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls
This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BHTH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. IR remote control lets you operate the source from the display end of the installation.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color
The B127A-111-BHTH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the transceiver over Cat6 cable. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.

Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0
Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy
Power over Cable (PoC) technology provides power to the transceiver via Cat6 cable
Transmitter’s local port shows you the 4K image being displayed at the other end
Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
1-year limited warranty
Applications:
Connect a laptop for a video or PowerPoint presentation in an auditorium or lecture hall, where the source device changes frequently
Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
Gain flexibility in where the transceiver is placed, with the freedom to move and relocate it away from an AC outlet
Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show or other location

Extender Type - HDMI
Rackmountable - Yes
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Transmission Range: 7010.40 cm
Certifications: CE, FCC, REACH
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 0.60 Amps
Warranty (Length/Type): 1 Year Limited
Technology: HDMI; HDR; Cat5/5e; Cat6; POC; IR
Video :
•Video Input: HDMI (FEMALE)
•Video Output:HDMI (FEMALE)
•Max Supported Video Resolution:3840x2160 (4K @ 60Hz)
•Max. Distance (Between any 2 Units): 230 ft.
•Max 1280 x 720 (720p) Range (ft): 230
•Max 1920 x 1080 (1080p) Range (ft): 230
•Max 1920 x 1200 Range (ft): 230
•Max 2560 x 1600 Range (ft): 230
•Max 3840 x 2160 (4K@30Hz) Range (ft): 230
•Max 3840 x 2160 (4K@60Hz) Range (ft): 230
•Transmitter Video Input: HDMI
•Transmitter - Number of Video Outputs: 1
•Transmitter - Local Display Output: HDMI
•Receiver/Transceiver Video Output: HDMI
•Receiver - Number of Video Outputs: 1
•Signal Range (ft): 230
•Signal Range (m): 70
•Range Extension using other Tripp Lite product: 230
•Recommended Cabling: Solid Wire Cat6 Cables (Tripp Lite's N202-Series)
•Other Tripp Lite product used to extend range: B127A-110-BH
•Max Supported Color Depth: 36-bit True Color
•HDR Support: Yes
•3D Video Supported: Yes
•Chroma Sub Sampling: 4:4:4
Audio : Audio Input: HDMI
•Audio Output:Toslink; HDMI
•Audio Specification: Pass-through audio (LPCM 2.0/5.1/7.1)
Power : Power Source: Transmitter or Receiver (Included)
•Power Source Type: AC Adapter
•AC Plug Type: NEMA 1-15P; BS1363; CEE 7/16 Schuko; AS/NZS 3112
•External Power Supply Input Specs (V / Hz / A): 100-240V / 50-60Hz / 0.6A
•External Power Supply Output Specs (V / A): 24V/1A
• External Power Supply Cord Length (ft.): 4.5
•External Power Supply Cord Length (m.): 1.38
•External Power Supply Certifications: CE; FCC; CCC; GS; TUV; UL; cUL
•Power Over Cable (PoC) Support: Yes
USER INTERFACE, ALERTS & CONTROLS :
•LED Indicators: TX: Green (Power), RJ45 Port: Green (Connection), Orange (Activity); TRX: Green (Power), RJ45 Ports: Green (Connection), Orange (Activity)
PHYSICAL :
•Included Mounting Accessories: Wallmount
•Material of Construction: Metal
•Number of Displays: 1
•Form Factor/Mounting Options: Box; Wall-mount
•Receiver Unit Dimensions (hwd / cm.): 11.5 x 6.25 x 2.69
•Receiver Unit Weight (kg): 0.453
•Transmitter Unit Dimensions (hwd / cm.): 11.5 x 6.25 x 2.69
•Transmitter Unit Weight (kg): 0.453
Environmental : Operating Temperature Range: 32 to 104°F (0 to 40°C)
•Storage Temperature Range 5 to 122°F (-15 to 50°C)
•Relative Humidity: 0% to 85% RH, Non-Condensing
Communications :
•Signal Range (m): 70
•EDID Compatible: Yes
•Consumer Electronics Control (CEC) Supported: Yes
•Latency: Zero-Latency
•USB Extension Support: No
Connections :
•Side A - Connector 1: (2) HDMI (FEMALE)
•Side A - Connector 2: RJ45 (FEMALE)
•Side A - Connector 3: (2) 3.5MM (FEMALE)
•Side B - Connector 1: (2) RJ45 (FEMALE)
•Side B - Connector 2: HDMI (FEMALE)
•Side B - Connector 3: (2) 3.5MM (FEMALE)
•Side B - Connector 4: TOSLINK (FEMALE)
FEATURES & SPECIFICATIONS :
•Driver Required: No
•Recommended Category Cable: Cat6
•Transmission Distance: 230 ft.
•Built-In Equalizer: No
Special Features :
•DIN Mountable: No
•Integrated/Removable Cable: No
•MST Support: No
•Included Mounting Accessory: No
•Multi-Resolution Support: No

Extender Kit 198605 kb - Data Sheet

Project List

Suggested Products

Alfatron TPBK70-R

by Alfatron Electronics, Inc.

4K 18Gbps HDMI USB KVM Extender via CATx Cable to 230 Feet

by Network Technologies Inc. (NTI)

4K 18Gbps HDMI Extender via One CAT6/6a/7: Extend up to 197 feet

by Network Technologies Inc. (NTI)