SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS, 2U Rack/Tower, Pre-Installed WEBCARDLX Network Interface, LCD Display, USB, DB9 Serial
Series: Smartpro
Model: SMART3000RM2UN
Automatic voltage regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA L5 to 30P input plug, 8 NEMA 5 to 15/20R output receptacles, 2 independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 98% full load efficiency rating offers reduced power consumption and BTU emissions
Extended runtime is available with optional BP48V24-2U (limit 1) or BP48V60RT3U (no limit), output is reduced to 1600W maximum with external battery packs
3kVA line interactive sine wave UPS with pre-installed SNMPWEBCARD. Enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Built-in auto-voltage regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions.
Automatic voltage regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
NEMA L5 to 30P input plug, 8 NEMA 5 to 15/20R output receptacles, 2 independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 98% full load efficiency rating offers reduced power consumption and BTU emissions
Extended runtime is available with optional BP48V24-2U (limit 1) or BP48V60RT3U (no limit), output is reduced to 1600W maximum with external battery packs
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Front panel LCD monitoring screen with mode and enter buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Built-in USB, RS-232 and SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Built-in emergency power off (EPO) interface with cable
Warranty - Yes
Rackmountable - Yes
UL Rated - Yes
Spec Sheet available - Yes
Operating Temperature (Maximum):
40 C
Operating Temperature (Minimum):
0 C
Cord Length (in/mm):
3048 mm
Estimated Runtime:
3.50 minutes
Output volt amp capacity:
3000 VA
Output Watt Capacity:
2250 W
Nominal Output Voltage (Supported):
120 V
Frequency Compatibility:
60 Hz
Built-in UPS output receptacles:
8 x 5 to 15/20R and 1 x L5 to 30R outlets
Rated input current (at maximum load):
24 A
Nominal Input Voltage (Supported):
120 VAC
Input Connection Type:
L5 to 30P
Battery Full Load Runtime:
3.5 minutes (2250W)
Battery Half Load Runtime:
10 minutes (1125W)
DC Battery System Voltage:
48 VDC
Primary Form Factor:
Rackmount
Shipping Dimensions:
7.9 x 21.7 x 24.2 inches
UPS housing material:
Steel
Cooling Method:
Fan
Package Includes:
SMART3000RM2UN UPS system with pre-installed SNMPWEBCARD, PowerAlert software with USB/serial/EPO cable, 4-post rackmount installation kit and instruction manual