Bi-amp/tri-amp mid-high loudspeaker is consists of 1-inch high frequency compression driver on Dendritic horn, 6.5-inch high-mid frequency driver on patented Polyhorn device and two Turbo-loaded 10-inch low-mid frequency drivers. It combines Dendritic HF device and midrange Polyhorn in physically aligned, equal path length waveguide with 100° of horizontal dispersion, ensuring phase-coherent wavefront at horn mouth. The compact trapezoidal enclosure contains 1-inch high frequency compression driver on Dendritic horn, 6.5-inch high-mid frequency driver on patented Polyhorn device and two turbo-loaded 10-inch low-mid frequency drivers. The TCS-1061/100 is switchable tri-amp/bi-amp enclosure and includes passive crossover network between MF and HF drive units which can be bypassed via an internal jumper located inside the low/mid driver access door. Neodymium drive units are used throughout in order to achieve cabinet’s low net weight. Recessed panel at the rear of cabinet carries two parallel-linked Speakon NL8 connectors for input and loop-through connections. An external flying system allows the assembly of unobtrusive loudspeaker arrays in fixed installations with wide range of coverage possibilities. Front and rear flying strips are supplied with each loudspeaker.
135dB maximum output
Ultra low distortion
100° horizontal dispersion
Trapezoidal enclosure
Neodymium drive unit
Rotatable mid/high section
Rigging hardware supplied
Fixed install line array
Bi-amp or tri-amp modes of operation
Applicable for house of worship, theatre, live music venues and dance clubs
Warranty - Yes
Horizontal Symmetry - Yes
Vertical Symmetry - Yes
Spec Sheet available - Yes
Construction:
15mm (5/8-inch) birch plywood, finished in black semi-matt textured paint
Horizontal Symmetry:
Yes
Vertical Symmetry:
Yes
Colour:
White
Warranty (Length/Type):
2 Years
Depth:
398.78 mm
Height:
711.20 mm
Width:
304.80 mm
Product Weight:
33.93 kg
Coverage Vertical:
16 degrees
Coverage Horizontal:
100 degrees
Maximum SPL (Sound Pressure Level):
129 dB
Transformer Option:
No
Components:
2 x custom 10" (254mm) LMF driver, 1 x custom 6.5" (165mm) HMF driver on midrange Polyhorn, 1 x custom HF driver on high frequency Dendritic device
Frequency Response (±3dB):
90Hz to 18kHz
Frequency Response (±10dB):
80Hz to 20kHz
LMF RMS Power Handling:
600 W
LMF Program Power Handling:
1200 W
HMF RMS Power Handling:
120 W
HMF Program Power Handling:
240 W
HF RMS Power Handling:
60 W
HF Program Power Handling:
120 W
LMF Sensitivity:
96 dB
HMF Sensitivity:
107 dB
HF Sensitivity:
103 dB
Maximum Peak SPL:
135 dB
High-mid/High passive:
12 ohms
LMF/HMF/HF Nominal Impedance:
8 ohms
Tri-amp mode Crossover Frequency (Active):
90Hz, 600Hz, 6kHz
Bi-amp mode Crossover Frequency (Active):
90Hz, 600Hz, 6kHz (passive)