The Australian Monitor Installation Series AMIS26 is a high quality 2 input, 6 output distribution amplifier. The AMIS26 provides a low noise, feature packed, signal routing solution to cover a wide range of installation needs, at a contractor friendly price.
- 2 inputs can be balanced or unbalanced and each input's sensitivity can be switched between Mic and Line level
- Each of inputs is individually assignable to any of the 6 outputs via front panel DIP switches
- 6 outputs can again be balanced or unbalanced and feature up to -60dB of attenuation so they can be run as any combination of line level or mic level outputs
- Input level controls are screw diver adjustable trim pots
- Input level can boost or cut the input signal by up to 15dB
- Recessed DIP switches assign either input A or B to a desired output
- Output level controls are screw driver adjustable trim pots
- This level control attenuates the output level, with a range from -60dB at "Minimum" position, to 0dBat "Maximum" position
- Output Level DIP switch will change the output sensitivity of the desired output from Mic to line level
- 24V DC Phantom Power is also individually switchable per input
- 4 segment LED meters show the strength of each of the AMIS26's input signals
- LED segments are calibrated to the following level markings and show the following colours -20dBu (green), -10dBu (green), 0dBu (yellow), +10dBu (red)
- -24V DC Phantom power is also individually switchable per input
