4K60 4:4:4 HDMI HDCP 2.2 Receiver/Scaler with Ethernet, RS232, IR and Stereo Audio over Extended-Reach HDBaseT

Model: VP-427H2

Part #: 72-04272090

Maximum output resolution (HDMI) - Up - and down-scales up to 4K at 60Hz (4:4:4)
Maximum input resolution (HDBaseT) - HDBaseT input resolution up to 4K at 60Hz (4:2:0)
Supports HDMI 2.0 and HDCP 1.4 / 2.2
Audio Support - Embedded and analog (supporting LPCM 2CH) for the output
HDBaseT Data Tunneling - Supports Ethernet tunneling, as well as bidirectional tunneling for RS232 and IR control

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

VP-427H2 is a high-performance receiver/scaler for extended-reach HDBaseT twisted pair, HDMI, bidirectional RS-232 and IR signals. The unit receives an HDBaseT signal that it converts to HDMI and passes Ethernet, IR and RS-232 signals, as well as an unbalanced stereo audio signal. It up- or down-scales the picture to match the resolution of the HDMI monitor.

Maximum output resolution (HDMI) - Up - and down-scales up to 4K at 60Hz (4:4:4)
Maximum input resolution (HDBaseT) - HDBaseT input resolution up to 4K at 60Hz (4:2:0)
Supports HDMI 2.0 and HDCP 1.4 / 2.2
Audio Support - Embedded and analog (supporting LPCM 2CH) for the output
HDBaseT Data Tunneling - Supports Ethernet tunneling, as well as bidirectional tunneling for RS232 and IR control
On-Screen Display (OSD) - For easy setup and adjustment, accessible via the front panel buttons
Constant Sync - Maintains sync on the output, even if input video signal is lost or interrupted
System Range - Up to 100m (328ft) at 4K
Applications:
Home theater
Presentation and multimedia
Rental and staging

Wireless Receiver Transmission - IR
HDBaseT - Yes
Wireless - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 40 C
Operating Temperature (Minimum): 0 C
Transmission Range: 9997.44 cm
Stromaufnahme: 2.50 Amps
DC-Spannung: 5 Volts
Tiefe: 145.03 mm
Height: 25.40 mm
Shipping Depth (with packaging): 212.09 mm
Shipping Height (with packaging): 71.88 mm
Shipping Width (with packaging): 351.03 mm
Width: 187.45 mm
Product Weight: 0.54 kg
Shipping Weight: 1.09 kg
Inputs: 1 HDBaseT twisted pair on an RJ-45 connector, 1 IR on a 3.5mm mini jack
Outputs: 1 HDMI connector, 1 IR on a 3.5mm mini jack, 1 unbalanced stereo audio (1.2Vrms nominal, 100-ohm) on a 3.5mm mini jack
Ports: 1 bidirectional RS-232 port on a 9-pin D-sub connector, 1 Ethernet on an RJ-45 connector, 1 USB (A) for upgrading
COMPLIANCE WITH HDMI STANDARD: Supports up to HDMI 2.0, and HDCP 2.2
Output Resolutions: 640x480 at 60Hz, 800x600 at 60Hz 1024x768 at 60Hz, 1280x768 at 60Hz, 1360x768 at 60Hz, 1280x800 at 60Hz, 1280x1024 at 60Hz, 1440x900 at 60Hz, 1400x1050 at 60Hz, 1680x1050 at 60Hz, 1600x1200 at 60Hz, 1920x1200 at 60Hz 480P at 60Hz, 576P at 50Hz, 720P at 50/60Hz, 1080P at 24/25/30Hz, 4k2k at 24/25/30Hz, 4k2k (4:2:0) at 50/60Hz, 4k2k (4:4:4) at 50/60Hz, Native
Maximum Input Resolution: (HDBaseT) 4K at 60Hz (4:2:0)
Output Refresh Rate: 60Hz for computer graphics resolutions, 50/60Hz for HDTV resolutions
Audio Sampling Rate: 48kHz for analog audio output
Video Latency: Progressive input - 30ms (approx.), interlaced input - 50ms (approx.)
Embedded Audio: HDMI and HDBT support multi-channel audio
RS-232 BAUD RATE: 115200bps maximum
Controls: Front panel buttons, OSD menu
Indicators: ON LED (green)

C-HM/HM/PRO - High Speed HDMI Cable with Ethernet

C-HM/HM/PRO-20 - 20' High Speed HDMI Cable with Ethernet

Receiver 96767 kb - Data Sheet

Projektliste

Receiver 272134 kb - Other

Projektliste

Find a Dealer

Find a Distributor

Suggested Products

SDVoE-based Point-to-multipoint HDMI 2.0 over Fiber Optical Link Receiver

by Lightware

UCX Matrix Switcher Receiver with HDMI 2.0 inputs and USB 3.1 Gen1 host ports

by Lightware

TeamUp+ Series HDBaseT3 and USB3 Receiver

by Liberty AV Solutions