44U Stand-Alone Floor Rack, 27-inch Depth

Series: LER

Model: LER-4427

Fully welded 16-ga. steel frame with 14-ga. base, reinforced at load-bearing junctions for strength equivalent to 11-ga. steel.
Open front with beveled corners and vents above and below main opening. Clearance from rails to outside frame (flush) is 1.75." A surface-mount front door is available as an option.
Includes recessed rear door with vents and key lock. Door can be omitted by ordering Model No. LER-4427-LRD. Combination knockout panels above and below rear door include .5" for wireless antennas, .75-.5" and 1.5-1" for conduit. A blank project panel is l
Top features 7U opening with riveted rails, taped 10-32, which can be closed with 2 black steel panels included as shipping stiffeners. Optional 19" accessories can also be mounted here. The top also features a 6"D rear plane with 3 combination knockouts f
14-ga. steel frame base with full size opening facilitates floor entry of cables. The base has provisions to readily accept mounting an optional mobile or stationary platform base or leg levelers, as well as anchor bolts (not included). Includes grounding

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

The LER enclosed or stand-alone floor rack offers solid structural support for electronics. Includes rear door. Front door is optional (order separately).

Fully welded 16-ga. steel frame with 14-ga. base, reinforced at load-bearing junctions for strength equivalent to 11-ga. steel.
Open front with beveled corners and vents above and below main opening. Clearance from rails to outside frame (flush) is 1.75." A surface-mount front door is available as an option.
Includes recessed rear door with vents and key lock. Door can be omitted by ordering Model No. LER-4427-LRD. Combination knockout panels above and below rear door include .5" for wireless antennas, .75-.5" and 1.5-1" for conduit. A blank project panel is l
Top features 7U opening with riveted rails, taped 10-32, which can be closed with 2 black steel panels included as shipping stiffeners. Optional 19" accessories can also be mounted here. The top also features a 6"D rear plane with 3 combination knockouts f
14-ga. steel frame base with full size opening facilitates floor entry of cables. The base has provisions to readily accept mounting an optional mobile or stationary platform base or leg levelers, as well as anchor bolts (not included). Includes grounding
Welded side panels with vents at top and bottom are designed to accept optional fan kits.
Includes 1 pr. front mounting rails tapped 10-32 with printed rack unit increments for quick set-up. Rails are fully adjustable and can be set anywhere along side rail supports. Rear rails are optional.
Cable Management: Combination knockouts above and below rear door.
Vents in top, sides, and rear door are made to accept optional fan kits.
Black wrinkle powder epoxy finish
Hardware PilotPoint™ screws with captive washers.

Warranty - Yes
Security (Locking) - Yes
ROHS Compliant - Yes
Rack Type - Standalone
Rack Rails - Yes
Palletized Shipping
LTL Shipping
Casters (Mobile) - Yes
Spec Sheet available - Yes

Regulatory Compliance: UL2416, EIA
Bau: Welded Certified US Steel
Width: 585.72 mm
Height: 2111.50 mm
Tiefe: 685.80 mm
Maximum Load Capacity: 1428.82 kg
Rack Rails: Yes
Warranty (Length/Type): Limited
Außen Tiefe/Länge: 685.80 mm
Außenhöhe: 2111.37 mm
Außenbreite: 585.72 mm
Interior Depth/Length: 618.24 mm
Mounting Width: 482.60 mm
Rack Units (Height): 44
Shipping Weight: 92.99 kg
Farbe: Black wrinkle powder epoxy

1474-LER4427.pdf 816515 kb - Data Sheet

Projektliste

Find a Dealer

Find a Distributor