Audio/Video Matrix Switch via CAT5 to 600 ft: 8x8

Series: VEEMUX®

Model: SM-8X8-C5AV-LCD

Configure and control the switch through Ethernet, serial port or front panel buttons.
Matrix Control Software with Graphical User Interface is included.
Supports resolutions up to 1920x1440.
Inputs and outputs can be named.
Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Zubehör

Dokumente

Accessoires

The VEEMUX® Audio/Video Matrix Switch routes audio and video inputs from 8 video sources to 8 displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/5e/6 UTP cable. It is capable of connecting to as many as 32 video sources via transmitters and 16 video displays via receivers with a maximum extension of 600 feet between the local and remote units. A single audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connected to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system. For more information, visit http://www.networktechinc.com/avmtx-cat5.html

Configure and control the switch through Ethernet, serial port or front panel buttons.
Matrix Control Software with Graphical User Interface is included.
Supports resolutions up to 1920x1440.
Inputs and outputs can be named.
Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.
Equipped with Liquid Crystal Display (LCD) for front panel operation.
A digital VU-meter shows the audio levels of the selected output.
Each output provides one video signal and one stereo audio signal.
Each input can be independently connected to any or all outputs with no image degradation.
No loss of audio or video quality between the local and remote units.
1RU or 2RU rackmount case is standard.
VGA, S-Video and HDTV transmitters and receivers can be supported on the same VEEMUX unit.
VGA inputs only work with VGA outputs, S-Video inputs only work with S-Video outputs, and HDTV component video inputs only work with HDTV component video outputs

Routing Type - Computer
Supported Resolution - 1080p (1920x1080)
Supported Resolution - SVGA (800x600)
Supported Resolution - Other
Switcher Audio Signal Type Supported - Unbalanced
Switcher Type - Computer
Warranty - Yes
ROHS Compliant - Yes
Rackmountable - Yes
Spec Sheet available - Yes

Anschlüsse: Female RJ45 input/output connectors. Signal to noise ratio (SNR): Audio: >72dBA; Video: >65dB. Audio harmonic distortion and noise: <0.06%. Video distortion: 70dB @ 10 MHz.
Bandwidth: Analog bandwidth is 175 MHz.
Protocols: HTTP. HTTPS, Telnet
Interface: 10/100BaseT ethernet interface. RS232 interface.
Power: 100 to 240 VAC at 50 or 60 Hz via IEC connector. Power consumption: 20W
MTBF: 58,607 hrs
Cables: Use CAT5, CAT5e or CAT6 solid straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
Environmental: Operating temperature: 32°F to 100°F (0°C to 38°C). Storage temperature: -22°F to 140°F (-30°C to 60°C). Operating and Storage Relative Humidity: 5 to 90% non-condensing RH.
Regulatory Approvals: CE, RoHS.
Warranty (Length/Type): Two years.
Dimensions: 1RU WxDxH (in): 19x12x1.75
VGA Transmitter: Male 15-pin HD connector for input connection. Female 15-pin HD connector for local monitor. Supports resolutions to 1920x1440. Signal to noise ratio: >55dB. Distortion: 65dB at 5MHz. Input impedance: 75 Ohms. Maximum input level: 1.45Vp-p. Supports Separate and Composite TTL level sync. Input Sync frequency ranges: Horizontal: 15 kHz to 130 kHz. Vertical: 30 kHz to 150 Hz. Video is DC coupled. Compatible Transmitters and Receivers
VGA Receiver: Female 15-pin HD connector. Supports resolutions up to 1920x1440. Signal to noise ratio: >55dB. Distortion: 65dB at 5MHz. Video quality adjustment for different lengths of CAT5/5e/6 cable is done automatically. When using CAT6, some degradation may be experienced depending on the length of the cable. Output impedance: 75 Ohms. Maximum output level: 1.45Vp-p. Compatible Transmitters and Receivers
VGA Video + Audio Transmitter: 3.5mm stereo audio RCA plugs for input connection and 3.5mm stereo audio jack for local speakers. Input impedance: 10k Ohms. Maximum input levels: 3.1Vp-p (line level). CD quality audio output. Compatible Transmitters and Receivers
VGA Video + Audio Receiver: 3.5mm stereo audio jack. Frequency response: 20 Hz to 20 kHz, ±1dB. Signal-to-Noise Ratio (SNR): 72 dBA. Total Harmonic Distortion and Noise (THD+N): 0.017%. Stereo crosstalk: -70 dB. Maximum output levels: 3.1Vp-p (line level). Line level output: supports multimedia speakers. CD quality audio output. Require powered speakers. Compatible Transmitters and Receivers
S-Video Transmitter: Male 4-pin miniDIN connector for input connection. Female 4-pin miniDIN connector for local monitor. Supports maximum 800x600 S-Video resolution. Input impedance: 75 Ohms. Maximum input level: 1.45Vp-p. Supports Separate and Composite TTL level sync. Input Sync frequency ranges: Horizontal: 15 kHz to 130 kHz. Vertical: 30 kHz to 150 Hz. Video is DC coupled. Compatible Transmitters and Receivers
S-Video Receiver: Female 4-pin miniDIN connector. Supports maximum 800x600 S-Video resolution. Video quality adjustment for different lengths of CAT5/5e/6 cable is done automatically. When using CAT6, some degradation may be experienced depending on the length of the cable. Output impedance: 75 Ohms. Maximum output level: 1.45Vp-p Compatible Transmitters and Receivers
S-Video + Audio Transmitter: Two RCA plugs for input connection and 3.5mm stereo audio jack for local speakers. Input impedance: 10k Ohms. Maximum input levels: 3.1Vp-p (line level). CD quality audio output. Compatible Transmitters and Receivers
S-Video + Audio Receiver: 3.5mm stereo audio jack. Frequency response: 20 Hz to 20 kHz, ±1dB. Signal-to-Noise Ratio (SNR): 72 dBA. Total Harmonic Distortion and Noise (THD+N): <0.06%. Stereo crosstalk: -70 dB. Maximum output levels: 3.1Vp-p (line level). Line level output: supports multimedia speakers. CD quality audio output. Require powered speakers. Compatible Transmitters and Receivers
HDTV Transmitter: Three RCA plugs for input connection. Three RCA jacks for local monitor. Supports HDTV resolutions to 1080p. Input impedance: 75 Ohms. Maximum input level: 1.45Vp-p. Supports Separate and Composite TTL level sync. Input Sync frequency ranges: Horizontal: 15 kHz to 130 kHz. Vertical: 30 kHz to 150 Hz. Video is DC coupled. Compatible Transmitters and Receivers
HDTV Receiver: Three RCA jacks. Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p. Video quality adjustment for different lengths of CAT5/5e/6 cable is done automatically. When using CAT6, some degradation may be experienced depending on the length of the cable. Output impedance: 75 Ohms. Maximum output level: 1.45Vp-p Compatible Transmitters and Receivers
HDTV + Stereo Audio Transmitter: Two RCA plugs for input connection and two RCA jacks for local speakers. Input impedance: 10k Ohms. Maximum input levels: 3.1Vp-p (line level). CD quality audio output. Compatible Transmitters and Receivers
HDTV + Stereo Audio Receiver: Two RCA jacks. Frequency response: 20 Hz to 20 kHz, ±1dB. Signal-to-Noise Ratio (SNR): 72 dBA. Total Harmonic Distortion and Noise (THD+N): <0.06%. Stereo crosstalk: -70 dB. Maximum output levels: 3.1Vp-p (line level). Line level output: supports multimedia speakers. CD quality audio output. Require powered speakers. Compatible Transmitters and Receivers
Operating Temperature (Maximum): 37.78 C
Operating Temperature (Minimum): 0 C
Zertifizierungen: CE, RoHS
Number of Inputs: 8
Number of Outputs: 8
Rack Units (Height): 1
Total Harmonic Distortion + Noise (THD+N): 0.01 %
Wechselspannung (Maximum): 220 Volts
Wechselspannung (Minimum): 110 Volts
Tiefe: 304.80 mm
Height: 44.45 mm
Width: 482.60 mm
Regulatory Compliance: CE, RoHS
Compatible NTI Products: Combine NTI's extenders, switches, and converters for complex applications. VGA/Component Video to HDMI Converter (VGACMP-HD). Use with VGA Receiver ST-C5VA-R-600 to convert the video and audio output into a single HDMI signal with embedded audio. Requires SAM-2RCAM-xx audio cables (not included). Ultra Low-Cost VGA + Audio to HDMI Converter Cable (VGAA-HD-ULC). Requires USB power from a compatible display or PC.

SM-16X16-C5AV-LCD - Audio/Video Matrix Switch via CAT5 to 600 ft: 16X16

VGAA-HD-ULC - Ultra Low-Cost VGA + Audio to HDMI Converter Cable

VGACMP-HD - VGA/Component Video to HDMI Converter

SM-nXm-C5AV-LCD - Data Sheet 764 kb - Data Sheet

Projektliste

SM-nXm-C5AV-LCD - Application Drawing 65 kb - Other

Projektliste

SM-nXm-C5AV-LCD - Installation and Operation Manual 693601 kb - Instructions

Projektliste

HD-10-MM
HDMI Male-male cable - 10 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-15-MM
HDMI Male-male cable - 15 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-25-MM
HDMI Male-male cable - 25 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-30-MM
HDMI Male-male cable - 30 ft; Max Resolution: 1080p@120Hz

HD-3-MM
HDMI Male-male cable - 3 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-50-MM
HDMI Male-male cable - 50 ft; Max resolution: 1080p@120Hz

HD-6-MM
HDMI Male-male cable - 6 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

SAM-2RCAM-05
Male Dual RCA to Male 3.5mm Stereo Audio Adapter - 0.5 ft

SAM-2RCAM-3
Male Dual RCA to Male 3.5mm Stereo Audio Adapter - 3 ft

SAM-2RCAM-6
Male Dual RCA to Male 3.5mm Stereo Audio Adapter - 6 ft

VEXT-1.5-MM
VGA Cable, Male to Male - 1.5 ft

VEXT-10-MM
VGA Cable, Male to Male - 10 ft

VEXT-15-MM
VGA Cable, Male to Male - 15 ft

VEXT-25-MM
VGA Cable, Male to Male - 25 ft

VEXT-3-MM
VGA Cable, Male to Male - 3 ft

VEXT-6-MM
VGA Cable, Male to Male - 6 ft