Signalmanagment und -verarbeitung : Vorverstärker : Radio Design Labs - FP-MP1

Studio Quality Mic Preamp w/ Phantom - Terminals & XLR

Series:

Model: FP-MP1

Professional Studio-Quality Low-Noise Performance
Switchable Internal Phantom Voltage
XLR and Terminal Block Connections
Selectable Input Level Ranges
Adjustable Gain with Dual-LED VU Metering

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

Accessoires

The FP-MP1 is the ideal choice in most applications requiring a preamp. RDL's exclusive low-noise discrete circuitry produces studio quality low noise performance in an economical preamplifier. The XLR and plug-in terminal block connections make the FP-MP1 perfect for both rack-mounted hardwired installations and remote use with standard audio cables. A front-panel switch permits the installer to direct phantom voltage to the input connectors. This 3-position switch provides 24V, 12V or phantom OFF. A second switch selects the input gain range thereby permitting the connection of standard or high output level microphones.< BR>

Professional Studio-Quality Low-Noise Performance
Switchable Internal Phantom Voltage
XLR and Terminal Block Connections
Selectable Input Level Ranges
Adjustable Gain with Dual-LED VU Metering
Ultra-Compact All Metal Construction
Convenience of RDL® FLAT-PAKs™

amplifiers
Preamplifiers
Amplifiers
Rackmountable - Yes

Input Impedance: 3 k ohms (balanced)
GAIN (4 ranges): MIN: 19 dB to 38 dB (switch-selectable) LOW: 26 dB to 45 dB (switch-selectable) MED: 36 dB to 55 dB (switch-selectable) HIGH: 46 dB to 65 dB (switch-selectable)
Headroom: XLR female (input); XLR male (output); 5 position plug-in terminal block (input and output)
Input Clipping Level: +4 dBu (at MIN gain)
Headroom: 20 dB (above +4 dBu
Low-Cut Filter: 80 Hz, 6 dB/Octave (switch-selectable)
Phantom Voltages: 12 V, 24 V (switch-selectable)
Phantom Voltage / Buildout Standard: IEC 1938 1996-12
CMRR: > 60 dB
Frequency Response: 20 Hz to 20 kHz (+/- 0.2 dB)
THD + N: < 0.1% (+4 dBu, all gain settings)
Noise (below +4 dBu): < -70 dB (60 dB gain, 20 Hz to 20 kHz); < -72 dB (60 dB gain, “A-Weighted”); < -80 dB (50 dB gain, 20 Hz to 20 kHz)
Equivalent Input Noise: < -130 dB (gain + residual noise below +4 dBu)
Anschlusstyp: XLR female (input); XLR male (output); 5 position plug-in terminal block (input and output)
Audio Level Indicators (2): Red LED: Output level > +4 dBu; Green: -10 to +4 dBu (variable intensity)
Power Requirement: GROUND-REFERENCED, 24 Vdc @ 100 mA
Height: 1.42 in 3.61 cm
Width: 3.25 in. 8.26 cm
overall length: 4.64 in. 11.79 cm
Tiefe: 36.07 mm
Width: 117.86 mm
Rackmountable: Yes

Datasheet for Studio Quality Mic Preamp w/ Phantom 298854 kb - Other

Projektliste

DRA-35F
Flat-Pak DIN Rail Adapter

FP-RRA
Rack Adapter FLAT-PAK Series - 19 in. Fixed

FP-RRAH
Rack Adapter FLAT-PAK Series - 19 in. Hinged

PM-1T
Pole Mount Tray

Find a Dealer

Find a Distributor

Suggested Products

Balanced/Unbalanced Microphone Preamp

by Vanco International

8-channel Microphone Preamplifier

by Yamaha Commercial Audio Systems, Inc.

MusicCast Wireless Streaming Preamplifier

by Yamaha Commercial Audio Systems, Inc.