Audio - Video Produktions- & Bearbeitungssysteme : Verstärker : TASCAM - MH-8

8-channel Headphone Amplifier

Model: MH-8

8 stereo 1/4-inch headphone outputs
Each headphone output switchable to input 1, input 2 and direct input source (or a combination of the three)
Master input gain controls
Ground lift switch and terminal
Music retailer listening station

Weitere Produktinformationen

Vergleichen

Projektliste

Produktinformation

Spezifikationen

Dokumente

MH-8 is the ultimate headphone amplifier for studio, stage and installation. Each of the eight stereo outputs gets 250mW per side with three switchable sources available. Two stereo inputs can be shared to any of the outputs, and individual stereo direct inputs are available for each of the eight channels. A headphone out can select any one of these inputs, or mix several together. A set of foldback outputs allows to chain other MH-8s into a system.

8 stereo 1/4-inch headphone outputs
Each headphone output switchable to input 1, input 2 and direct input source (or a combination of the three)
Master input gain controls
Ground lift switch and terminal
Music retailer listening station
Recording studio monitoring
In-ear stage monitor distribution
Tradeshow headphone distribution

Amplifier Signal Type - Audio
Amplifier Type - Headphone Amplifier

Operating Temperature (Maximum): 35 C
Operating Temperature (Minimum): 5 C
Number of Channels: 8
Tiefe: 280 mm
Height: 44 mm
Width: 482 mm
Product Weight: 3.80 kg
Phones Output Frequency Response: 20Hz to 50kHz (+/-3dB)
Foldback Output Frequency Response: 10Hz to 100kHz (+/-3dB)
Phones Output Signal to Noise Ratio: 85 dB (A-weighted, 20kHz LPF)
Foldback Output Signal to Noise Ratio: 90 dB (A-weighted, 20kHz LPF)
Phones Output THD: 0.05 % (When outputting 100mW + 100mW (32-ohms), 20Hz HPF and 20kHz LPF)
Foldback Output THD: 0.007 % (20Hz HPF and 20kHz LPF)
Phones Output Channel Separation: 50 dB (A-weighted, 20kHz LPF,1kHz nominal input, 32-ohms termination)
Foldback Output Channel Separation: 90 dB (A-weighted, 20kHz LPF,1kHz nominal input, 600-ohms termination)
Phones Output Crosstalk: 65 dB (A-weighted, 20kHz LPF,1kHz nominal input, 32-ohms termination)
Supply Voltage: AC 100 to 240V, 50 to 60Hz
Power Consumption: 36 W

Headphone Amplifier 832 kb - Other

Projektliste

Find a Dealer

Find a Distributor

Suggested Products

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.

Single Channel 40W 70/100V Amplifier with Mic Input

by Vanco International

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 70V, North America and Japan, 100-120V

by Crestron Electronics, Inc.