hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production & Lighting
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
AtlasIED - FAP8CXT

Strategy II 2-Way True Compression Driver Coaxial Speaker System with 60 Watt 70.7V / 100V Transformer

Series: Atlas

Model: FAP8CXT

  • "Press -fit" grille to better blend into contemporary architecture
  • 1-inch Exit compression high frequency driver coupled to a specially designed conical wave-guide horn provides exceptional output & accurate high frequency reproduction
  • 90 Degree conical dispersion (2kHz octave band)
  • Extended low frequency response from the optimally tuned and ported deep drawn galvanized steel enclosure (937 cubic inches)
  • Front mounted tap selector switch for easy system tuning adjustments (1.9W to 60W @ 70.7V plus 8 ohm setting)
Compare
Project List
Product Info
Tech Specs
Documents
Strategy II 2-Way True Compression Driver Coaxial Speaker System with 60 Watt 70.7V / 100V Transformer
The Atlas Sound FAP8CXT is a true compression driver premium performance 70.7/100V tuned & ported 8" coaxial ceiling speaker system perfectly suited for many business music and public address applications -"especially applications where high ceilings require loudspeakers with increased efficiency and tighter pattern control.

The FAP8CXT's 90° dispersion angle (in the 2 kHz octave band) is perfect for higher ceiling applications where tighter pattern control is required. Tight pattern control (not exceeding 90°) is important for high ceiling applications. Loudspeakers exhibiting wider dispersion than 90° will exceed 6 dB of drop off at the edge of the coverage pattern causing excessive SPL variances. Using more of the same wide coverage speaker in a high ceiling application to compensate only worsens the situation as comb filtering from multi-path arrivals will result.

The unit features a curvilinear, polypropylene cone for lower harmonic distortion, and a built-in crossover network for proper frequency transition between the two reproducers. This loudspeaker is factory assembled to an optimally tuned & ported deep drawn enclosure and includes a specially designed 60 watt low saturation 70.7V / 100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the speaker from the ceiling. This tap selector switch also includes a transformer bypass setting for instances where the 8 ohm FAP8CXT driver is to be direct coupled with a low impedance amplifier.
  • "Press -fit" grille to better blend into contemporary architecture
  • 1-inch Exit compression high frequency driver coupled to a specially designed conical wave-guide horn provides exceptional output & accurate high frequency reproduction
  • 90 Degree conical dispersion (2kHz octave band)
  • Extended low frequency response from the optimally tuned and ported deep drawn galvanized steel enclosure (937 cubic inches)
  • Front mounted tap selector switch for easy system tuning adjustments (1.9W to 60W @ 70.7V plus 8 ohm setting)
  • Includes C-ring/V-rail tile bridge mounting hardware
  • Unique "trap door" input section allows for through conduit runs with rigid or flex conduit
 
 

Suggested Products