Control Systems : Related Control Systems Products : Crestron Electronics, Inc. - CSP-RS232I

RS-232 Isolator

Model: CSP-RS232I

Part #: 6501814

Recommended for lengthy or outdoor RS-232 cable runs
Protects control systems from lightning strikes and electrical disturbances
Supports RS-232 from 300 to 115.2k baud
Passes RX, TX, RTS, and CTS signals
4.5 Kilovolt RMS galvanic isolation

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The CSP-RS232I is an accessory designed to protect a Crestron® control system's COM ports from lightning surges and other electrical disturbances brought through the RS-232 control line[1]. By electrically isolating any distant, outdoor device such as a pool & spa controller or irrigation system, the CSP-RS232I can prevent damage to the control system in the event of a near lightning strike, ground-loop, or short from a high voltage line.

Recommended for lengthy or outdoor RS-232 cable runs
Protects control systems from lightning strikes and electrical disturbances
Supports RS-232 from 300 to 115.2k baud
Passes RX, TX, RTS, and CTS signals
4.5 Kilovolt RMS galvanic isolation

Systems Controlled - Other
Spec Sheet available - Yes

Depth: 95.50 mm
Height: 34.04 mm
Width: 114.81 mm
Product Weight: 0.26 kg
DC Voltage: 24 Volts
Operating Temperature (Maximum): 70 C
Operating Temperature (Minimum): 0 C
Protection:
- Isolation: 4.5 KilovoltsRMSfor 1 minute
Connectors:
- DEVICE:
  - (1) DB9 male, isolated bidirectional RS-232 pass-through port[1]
  - Passes RX, TX, RTS, and CTS signals
  - Supports 300 to 115.2k baud
- Ground: (1) 6-32 screw, chassis ground lug
- CONTROL SYSTEM:
  - (1) DB9 female
  - Connection to any Crestron COM port[1]
  - 6 ft (1.83 m) interface cable included
- PWR 24VDC:
  - (1) 2-pin 3.5mm detachable terminal block
  - 24 Volt DC power input
  - May be connected to a Cresnet®network or dedicated power supply (not included)
- PWR 12VDC:
  - (1) 2.5mm barrel DC power jack
  - 12 Volt DC power input
  - (PW-1205 or PW-1205RU power pack sold separately)
Indicators:
- PWR: (1) green LED, indicates power supplied via Cresnet network or local power pack
Power requirements:
- Power Pack:
  - 0.5 Amp @ 12 Volts DC
  - For use with Crestron model PW-1205 (120V) or PW-1205RU (100-240V) power pack, each sold separately
- Cresnet Power Usage: 1 Watt (0.04 Amp @ 24 Volts DC) with no power pack connected
Environmental:
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: 3 BTU per hour
Enclosure: Steel, surface mount box with (2) integral mounting flanges, printed label
NOTES:
- Supports RS-232 only; does not support RS-422 or RS-485.

PW-1205 - Wall Mount Power Pack, 12VDC, 0.5A, 2.5mm, US/NA

PW-1205RU - Wall Mount Power Pack, 12VDC, 0.5A, 2.5mm, Universal

Isolator 872 kb - Data Sheet

Project List

Find a Dealer