The 7702BPX-IF-B50 2x1 RF protection switches for IF frequencies provide automatic changeover functionality to provide bypass protection for RF signals from 10MHz to 850MHz. Typical applications include main/standby failover protection for 70/140MHz uplink applications. When used for automatic changeover, the 7702BPX-IF have a MAIN input and a STANDBY input. It will automatically switch to the Standby input when the Main input power is weak or lost. Switch back to the Main input when the signal is re-established may be configured to happen automatically or manually. The 7702BPX-IF occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Intelligent auto switching with input power detection
- User definable threshold levels on 7703BPXA-IF version
- Maintains switch state and RF channel on loss of power to card or frame
- Supports automatic or manual control via GPI or SNMP on 7703BPXA-IF
- Switch state indication via GPO
- Card edge LEDs indicate active input channels, output channel and power levels below threshold
- Fully hot swappable from front of frame
- Wide operating frequency range, 10MHz to 850MHz
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability on 7703BPXA-IF version