Fibre Optic Systems : Fibre Optic Receivers & Transmitters : Evertz - 7707ADVTxx

Analog or SDI Video & 4 Analog or 4 AES Audio Fiber Transmitter, CWDM Laser

Model: 7707ADVTxx

Single card fiber optic transmitter for one composite Analog or SDI video and four analog or AES audio signals
Auto-sensing (analog or digital) video and audio inputs
Supports both NTSC and PAL analog or 4:2:2 component digital video
Supports Analog to Digital and Digital to Analog audio conversion
Broadcast quality analog video and audio performance

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707ADVTxx is a Analog or SDI Video & 4 Analog or 4 AES audio fiber transmitter, CWDM Laser. Single card fiber optic transmitter for one composite Analog or SDI video and four analog or AES audio signals.

Single card fiber optic transmitter for one composite Analog or SDI video and four analog or AES audio signals
Auto-sensing (analog or digital) video and audio inputs
Supports both NTSC and PAL analog or 4:2:2 component digital video
Supports Analog to Digital and Digital to Analog audio conversion
Broadcast quality analog video and audio performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
Supports 32, 44.1, 48kHz AES audio inputs
Dolby E compatible
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®.
Audio de-embedding capability for digital video and Analog or AES Audio
-NF version converts input video & audio to a 270Mb/s copper output to interface with any SD-SDI or other 270Mb/s service
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Adjustable gain equalization for analog video for up to 250m of Belden 1694A coaxial cable
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths at 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU G 694.2 compliant)
DWDM wavelengths also available (ITU G.694.1 compliant)
Outputs available with fiber optics and BNC or BNC's only (-NF version)
Passes embedded and/or external audio for digital video

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Active Power: 15 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
Analog Video Input Standard: NTSC (SMPTE ST 170), PAL (ITU-R 624-2)
Analog Video Input Number of Inputs: 1
Analog Video Input Connector: BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization: 12 bits
Analog Video Input System Bandwidth: > 5.5MHz
Analog Video Input Level: 2V p-p (maximum)
Analog Video Input Gain Equalization: Up to 250m of Belden 1694 or equivalent (adjustable)
Analog Video Input Impedance: 75 ohm
Analog Video Input Return Loss: > 30dB to 5.5MHz
Analog Video Input SNR: > 70dB
Analog Video Input Differential Gain: < 1.0%
Analog Video Input Differential Phase: < 0.7°
Analog Video Input Passband Ripple:
Analog Video Input NTSC: < ±0.1dB to 4.1MHz
Analog Video Input: < ±0.2dB to 5.5MHz
Analog Video Input PAL: < ±0.1dB to 4.8MHz
Analog Video Input Chroma/Luma Gain: 98% to 103%
Analog Video Input Chroma/Luma Delay:
Analog Video Input Line Time Distortion: 0.012
Serial Video Input Standard: SMPTE ST 259-C, SMPTE ST 305 (SDTi), DVB-ASI
Serial Video Input Number of Inputs: 1
Serial Video Input Connector: BNC per IEC 61169-8 Annex A
Serial Video Input Equalization: Automatic to 250m @ 270Mb/s with Belden 1694 or equivalent cable
Return Loss: > 15dB up to 270Mb/s
Serial Video Input Number of Outputs: 1
Serial Video Input Level: 1V p-p
Serial Video Input Impedance: 75?
Serial Video Input Return Loss: > 30dB to 5.5MHz
Serial Video Output Number of Outputs: 2 (1 loopback, 1 serial)
Serial Video Output Connector: BNC per IEC 61169-8 Annex A
Signal Level: 800mV nominal
Serial Video Output DC Offset: 0V ±0.5V
Serial Video Output Rise/Fall Time: 900ps nominal
Serial Video Output Overshoot: < 10% of amplitude
Serial Video Output Return Loss: > 15dB at 270Mb/s
Serial Video Output Wideband jitter: < 0.2UI
Analog Audio Input Number of Inputs: 4
Analog Audio Input Type: Balanced analog audio
Analog Audio Input Connector: 12-pin removable terminal block
Analog Audio Input Impedance: High Impedance (> 10k?)
Analog Audio Input Frequency Response: ±0.1dB, 20Hz to 20kHz
Analog Audio Input THD: < 0.005%, 20Hz to 20kHz
Analog Audio Input Channel Phase Differential: ±1°
Analog Audio Input SNR (weighted): > 85dB
Analog Audio Input Maximum Input Level: +24dBu
Analog Audio Input Signal Quantization: 24 bits
AES Audio Input Number of Inputs: 4 (auto-sensing for balanced or unbalanced input)
AES Audio Input Balanced: AES3-1992
Unbalanced: SMPTE ST 276
AES Audio Input Other: Dolby E compatible
AES Audio Input Connector: 12 pin removable terminal block
AES Audio Input Return Loss: > 15dB, 1MHz to 6MHz
Signal Level Balanced: 1V to 7V p-p
Signal Level Unbalanced: 1.2V p-p ±0.1V
Signal Level Resolution: Up to 24 bits
Signal Level Sampling Rate: 32, 44.1, 48kHz
Impedance Balanced: 110 ohm
Impedance Unbalanced: 75 ohm
Optical Output Number of Outputs: 1
Optical Output Connector: Female SC/PC, ST/PC, FC/PC
Optical Output Return Loss: > 14dB
Optical Output Rise/Fall Time: 200ps nominal
Optical Output Fiber Size: 9µm core / 125µm overall
Wavelength Standard: 1310nm, 1550nm (nominal)
Power 1310nm FP (Standard): -7dBm ±1dBm
Power 1550nm & CWDM DFB: 0dBm ±1dBm
Power DWDM DFB: 7dBm ±1dBm
Wavelengths CWDM: 1270,1290,1310,1330,1350,1370,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610 Nm

AES Audio Fiber Transmitter 99 kb - Data Sheet

Project List