These quad SDI/ASI mux fiber transmitter transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space.
Single card TDM multiplexer for four synchronous or asynchronous 270Mb/s SDI, SDTi or DVB-ASI video signals
Output is compatible with SMPTE ST 292 reclocking devices
Signal transport over fiber uninterrupted by loss of any SDI, SDTi or DVBASI input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
Automatic coaxial input equalization up to 250m at 270Mb/s (Belden 8281)
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Active Power:
13 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
FCC Part 15 Class A, EU EMC Directive
Serial Video Input - Standard:
SMPTE ST 259-C, SMPTE ST 305, DVB-ASI
Serial Video - Number of Inputs:
4 independent SDI or DVB-ASI 270Mb/s signals
Serial Video Input - Connector:
4 BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization:
Automatic to 250m @ 270Mb/s with Belden 8281 or equivalent cable
Serial Video Input - Return Loss:
> 15dB up to 270Mb/s
Optical - Number of Outputs:
1
Optical Output - Connector:
Female SC/PC, ST/PC or FC/PC
Optical Output - Return Loss:
> 14dB
Optical Output - Rise and Fall Time:
200 ps nominal