The EIA/TIA compliant 19" floor rack shall be Lowell model #LER-1827 with overall dimensions of 37.625"H x 27.00"D x 23.06"W; usable height of 18 rack units, and usable depth of 24.34". Rack construction shall be fully welded certified U.S. steel with 16-gauge frame and 14-gauge bottom reinforced at load-bearing junctions, all with black wrinkle powder epoxy finish. Welded sides shall feature vents at top and bottom. The rack shall include a recessed rear door with vents and key lock, removable knockout panels above and below door with 1/2" KO for wireless antennae, 1/2"-3/4" and 1"-1-1/2" EKO for conduit and a blank project panel. The front shall feature vents along top and bottom, and provisions to accept an (optional) surface-mount door with left or right hand swing. The closed steel top shall feature two vents. Rack bottom shall have an opening measuring 22.88" x 19.94" and include a grounding stud. Rack shall include 1 pair of (18U) adjustable 11-gauge steel rails tapped 10-32 on 19" E.I.A. spacing with black finish and numbered rack unit increments. The UL 2416 Listed rack shall be manufactured in the U.S.A. with a UL Listed load capacity of 500 lbs.
- Panel Space: 18U or 31.625" [803]
- Overall Height: 37.625" [956]
- Overall Depth: 22.00" [686]
- Overall Width: 23.06" [586]
- Construction: Fully welded certified U.S. steel, 16- gauge frame with 14-ga. bottom reinforced at load-bearing junctions for robust support, strength equivalent to 11-ga. steel. Black wrinkle powder epoxy finish. Beveled edge corners front and rear
- Front: Upper and lower vents. Frame nutserts are ready to add optional surface-mount door (left or right swing). Order front door separately
- Rear: Removable knockout panels in frame above and below door feature combination EKOs for conduit (1/2"–3/4" and 1"–1-1/2") and KOs for wireless antennae (1/2"). Removable blank project panel in frame below door. Standard model includes recessed door wit
- Sides (welded): Welded side panels with vents at top and bottom
- Bottom (open access): Includes 10-32 threaded grounding stud in corner, 3/8"-16 threaded T-nuts for (optional) leg levelers, and holes for anchor bolts (by others). Opening is 22.88"D x 19.94"W
- Closed Top (with vents): Steel top with two vents
- Cable Management: Combination knockouts in rear
- Rack Rails - 18U (fully adjustable): One pair of 11-ga. steel 10-32 threaded rails on E.I.A. spacing with bi-directional numbered RU increments (rails mount in either direction). Black finish. Clearance from front rail to outside frame (1.75"), from front
- Hardware: Black pilot point screws with captive washers for quick installation. (25)
- Compliance: EIA/TIA compliant. RoHS compliant. UL 2416 Listed in U.S.A. and Canada
- UL Listed Load Capacity: 500 lbs. [227 kg]
- Optional: Front door, additional rails, mobile or stationary base, leg levelers
