Signal Processing Systems : Receivers & Transmitters (Wired) : Matrox Graphics Inc. - CIP-SRS

SMPTE 2110 and IPMX to SDI Transmitter/Receiver

Model: CIP-SRS

12G-SDI I/O
1G and 2.5G support over RJ45
Single device that transmits or receives IP signals
Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
Fanless design for quiet cooling

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Matrox ConvertIP SRS is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Delivering up to 4K60 image quality and featuring one RJ45 port, ConvertIP SRS is designed for both 1G and 2.5G AV workflows and is optimal for an ultra-low latency experience. ConvertIP SRS supports Power over Ethernet through its RJ45 connection, and power redundancy through an optional power supply unit.

12G-SDI I/O
1G and 2.5G support over RJ45
Single device that transmits or receives IP signals
Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
Fanless design for quiet cooling
Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
Compact form factor mounts easily to the back of a monitor
Web-based user interface for managing ConvertIP devices
Complimentary ConvertIP Manager Windows application for simple commission and deployment

Rackmountable - Yes
ROHS Compliant - Yes
Warranty - Yes

Operating Temperature (Maximum): 45 C
Operating Temperature (Minimum): 0 C
Certifications: CE, FCC, ICES, KC, RCM, REACH
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 18 Watt
Current Draw: 0.50 Amps
DC Voltage: 12 Volts
Depth: 200.15 mm
Height: 35.31 mm
Width: 139.70 mm
Product Weight: 0.49 kg
Colour: Black
Warranty (Length/Type): 3 Years
Video Input: TX mode: 12G SDI
Video Output: RX mode: 12G SDI
Video Resolution: HD and 4K resolutions (including broadcast)
VANC ancillary data processing: Yes
Audio Input/Output: Up to 16 channels of audio embedded in SDI output signal
Network Connector: 1x RJ45 LAN port for Media and Control with PoE+ (1/2.5G)
Control and management: Matrox ConvertIP Command Center (web UI), Matrox ConvertIP Manager (software application)
Maximum Video Resolutions: 4096 x 2160 60p
Bit Depth and Color Space: YCbCr 4:2:2 10-bit, SDR/HDR1
Video Scaling: High Quality multi-tap 10-bit Up/Down Scaler
Video Deinterlacing: Yes
Color Space Conversion: Yes
Video: Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content, ProAV Colibri codec included: 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps; JPEG-XS codec upgrade required: 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio: Uncompressed PCM (~1 Mbps/ch)
Latency: Less than a 1/4 frame (<4 ms)
Network Standard: RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP addressing: IPv4, IPv6, DHCP (default) and static IP
Supported Protocols: SMPTE ST 2110 (-10, -22, -30, -401), SMPTE 2059 (-1, -2), IPMX
Command and Control: HTTPS over TCP
Discovery, Registration and Control: NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
PoE+: Yes (IEEE 802.3at Type 2)
Operating Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m)
Operating Humidity: 20% to 80% non-condensing
Storage Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m)
Storage Humidity: 5% to 95% non-condensing

Find a Dealer