16PT GigE Unmanaged Switch W/ POE+

Series: Gigabit Unmanaged Switch

Model: GS516PP

Part #: GS516PP-100NAS

High-power PoE with impressive PoE budgets for all types of PoE installations
Simple set up with no software or configuration needed
Per port LEDs for port activity and speed
Energy efficient technology for power savings
Auto-negotiation for automatic connection at the highest common speed between switch and an end device

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Simple plug-and-play, with more than enough to power the entire network 16 high-power PoE+ ports with a large budget to keep your devices always-ready.

High-power PoE with impressive PoE budgets for all types of PoE installations
Simple set up with no software or configuration needed
Per port LEDs for port activity and speed
Energy efficient technology for power savings
Auto-negotiation for automatic connection at the highest common speed between switch and an end device
16 or 24 auto-sensing 10/100/1000 Mbps Gigabit Ethernet ports with up to 32 or 48Gb non-blocking switching
Auto-MDI/MDIX eliminates the need for crossover cables
Small, sturdy desktop metal case and quiet operation
Ideal for small and medium offices
Non-blocking switching architecture for maximum throughput at wire speed
Standards-based technology ensures interoperability with any standards-based devices in the existing network Desktop and rack-mountable
802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points
802.3bt Power Over Ethernet (PoE++) on the GS516UP and GS524UP models for IP cameras, VoIP/Internet-based phones, wireless access points, smart building lighting, audio speakers and pan-tilt-zoom cameras
Unique PoE technology automatically balances the PoE power based on the device needs independent of PoE class detected. The switches deliver the power the device needs, at the most granular level.
Enable Pre-802.3bt devices using our PoE Mode

Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Enclosure: Metal
connector type: Metal
Form Factor: Desktop/Rack mount
802.3at PoE+ Ports: 16
802.3bt PoE++ Type 3 Ports: 0
PoE Max Power Per Port: 30W
Total PoE Power Budget: 260W
Bandwidth (Non-Blocking): 32 Gbps
Packet Buffer Memory (Dynamically shared across only used ports): 192 kb
Jumbo Frame Support: 9216 bytes
Queue WRR (Weighted Round Robin) Ratio: 1:2:4:8
Forwarding Rate (using 64-byte packets) - 1000Mbps Port: 1,448,000 pps
Latency (using 64-byte packets) - 1000Mbps Port (average): < 12 µsec
MAC Address Table Size: 8K
Auto MDI/MDI-X Cable Detection: Yes
Auto-sensing Half/Full Duplex Switched Ports: Yes
Mean Time Between Failures (MTBF) @ 25° C: 2415333.9 hrs
Acoustic noise level @ 25°C (dBA): 34.0 dBA
LEDs Per port: Speed, Link/Activity, PoE
Per device: Power, PoE Max, Fan
802.1P Based (CoS) Supported: Yes
Honors DSCP (DiffServ) Tags: Yes
Heat Dissipation (Max and Standby) (BTU/Hr): 1079.1654BTU/31.0674BTU
Energy Efficient Ethernet (EEE) IEEE 802.3az compliant: Yes
Auto Power Down: Yes
Short Cable Detection: Yes
Fan/Fanless: 2 Fan
Humidity: 10%–90% relative humidity, noncondensing
Altitude: 3000 M
Humidity (Relative): 10%~95%, non-condensing
Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Certifications: FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC
Number of 10/100/1000 Mbps Ports: 16
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 316.10 Watt
Current Draw: 5 Amps
Standby Power: 9.10 Watt
Depth: 207 mm
Height: 43 mm
Width: 330 mm
Product Weight: 2.30 kg
Warranty (Length/Type): Lifetime

Switch 645143 kb - Data Sheet

Project List

Switch 1062613 kb - Instructions

Project List