Audio Production Equipment : Amplifiers (Audio) : Radio Design Labs - HD-PA35X

35W Power Amplifier, 4ohms or 8ohms Output, 9dBV Maximum Input Level

Series: HD

Model: HD-PA35X

One input with front-panel volume control
Bass and treble tone controls
Designed as a single zone amplifier
Master volume VCA controlled with remote adjustment capability
Amplifier output on detachable terminal block

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

35W power amplifier is a single input audio amplifier for systems demanding high energy efficiency. It may be used as a single zone amplifier fed from a variety of RDL or OEM mixers. It is ideal for providing one or more additional zones to a mix originating from another mixer amplifier. The 35 W power amplifier output is driven from a high-efficiency class D amplifier stage. The amplifier includes an analog compressor/limiter for audio fidelity.

One input with front-panel volume control
Bass and treble tone controls
Designed as a single zone amplifier
Master volume VCA controlled with remote adjustment capability
Amplifier output on detachable terminal block
Unbalanced summing inputs on RCA jacks
Includes power supply
High-efficiency class D operation

Amplifier Signal Type - Audio
Amplifier Type - Power Amplifier
Spec Sheet available - Yes

Operating Temperature (Maximum): 50 C
Operating Temperature (Minimum): 0 C
Depth: 171.45 mm
Height: 88.90 mm
Width: 215.90 mm
Product Weight: 2.70 kg
Rated power: 35 wRMS
Audio Input: Unbalanced stereo summing input on RCA jacks
Maximum Input Level: 9dBV (+15.5dBV, one input), (for 1% THD+N at output)
Compressor: Threshold 2dB below rated output, automatically adjusting attack and release times
Frequency Response: 50Hz to 20kHz ( at +/-1dB)
Tone Controls: ±10dB at 10kHz, ±9dB at 100Hz (front-panel) with center detent
Power Amplifier Output: 35Wrms (4Ohms), 32W (8Ohms) on detachable terminal block, <1% THD+N
Indicators (3): Signal present (green), Compressor activity (red), Power (bright=on, dim=standby, blue)
VCA: Output level, 0 to 10Vdc control, detachable terminal block (compatible with RDL VCA wall controls)
Front-panel Controls (4): Input, EQ (2, bass and treble), Power (latching pushbutton, on/standby)
Power Supply: 100 to 240Vac, 50 to 60Hz, 50W, 24Vdc output to amplifier chassis
Shipping Weight: 2.04 kg

Power Amplifier 3192 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

6x6 Audio Distribution Amplifier

by Vanco International

8-Channel Power Amplifier, 75W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.

8-Channel Power Amplifier, 150W/Ch., 4/8 Ohm or 100V, International, 220-240V

by Crestron Electronics, Inc.