Wireless Signal Processing : Beltpack Receivers & Transmitters (Wireless) : Shure Incorporated - P3TRA215CL

Stereo Personal Monitor System with P3RA Professional Wireless Bodypack Receiver

Series: Shure

Model: P3TRA215CL

Includes P3RA, P3T, SE215, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, battery adapter kit, 2 AA batteries, zipper bag, and user guide
PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage
Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts
Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel
Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Other Options

The P3TRA215CL is part of the PSM 300 wireless systems family.

Includes P3RA, P3T, SE215, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, battery adapter kit, 2 AA batteries, zipper bag, and user guide

PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage. Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts.

Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio.

Includes P3RA, P3T, SE215, rackmount and hardware kits, ¼ wave antenna, BNC bulkhead adapter, BNC cable, power supply, battery adapter kit, 2 AA batteries, zipper bag, and user guide
PSM®300 Stereo Personal Monitor Systems deliver reliable wireless freedom to every corner of the stage
Patented Audio Reference Companding ensures the clearest sound, with ultra-low noise and no artifacts
Easy to setup and operate, PSM 300 systems offer one-touch frequency scan and sync to find and assign a clean wireless channel
Adjust the volume and use MixMode® technology or stereo mode to create a personal mix from two channels of audio

Wireless Receiver Transmission - FM
Wireless Receiver Transmission - IR
Wireless - Yes

P3R WIRELESS BODYPACK RECEIVER:
- Active RF Sensitivity (at 20 dB SINAD): 2.2 ?V
- Image Rejection: >90 dB
- Adjacent Channel Rejection: >60 dB
- Intermodulation Attenuation: >50 dB
- Blocking: >60 dB
- Audio Output Power (1 kHz at <1% distortion, peak power, at 32 ohm): 80 mW (per output)
- Minimum Load Impedance: 16 ohm
- Headphone output: 3.5 mm (1.8") stereo
- Net Weight: 98 g (3.5 oz.) (without batteries)
- Dimensions (H × W × D): 110 × 64 × 21 mm (4.3 x 2.5 x 0.8 in.)
- Battery Life: 5-7 hours (continuous use) AA batteries
P3T TRANSMITTER:
- RF Output Power 10, 20, 30 mW
- Note: varies by region
- RF Output Impedance 50 ohm (typical)
- Net Weight 783 g (27.6oz.)
- Dimensions (H × W × D) 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.)
- Power Requirements 12–15 V DC, 260 mA maximum

Monitor System 349 kb - Brochure

Project List

Stereo Personal Monitor System with P3RA Professional Wireless Bodypack Receiver, 488 to 512MHz Frequency Range

by Shure Incorporated

Model: P3TRA215CL-G20

Stereo Personal Monitor System with P3RA Professional Wireless Bodypack Receiver, 566 to 590MHz Frequency Range

by Shure Incorporated

Model: P3TRA215CL-J13

Find a Dealer

Suggested Products

653-663 MHz Bodypack Transmitter

by Electro Voice

2-channel UHF Wireless Beltpack Transceiver with A4M Headset Connector

by RTS

Portable Single Channel IFB Beltpack with 1/4-inch Jack

by RTS